Yep, did that. As far as the other interfaces, do I need to use ether3 as the vpn port? It's not plugged into anything, I was going into ether2 with the vpn as well as my local interface.
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Tuesday, September 21, 2010 8:34 PM To: WISPA General List Subject: Re: [WISPA] Mikrotik VPN Script Probably want to masquerade the subnet. What ips did you use for the tunnel in relation to the other interfaces? On Sep 21, 2010 8:29 PM, "Robert West" <robert.w...@just-micro.com> wrote: Okay, fighting this nightmare of setting up a MT 411 board as a VPN. Anyone have a script of a step by step? I can connect remotely but can never see anything on the network. Throwing in the towel yet again. Me- ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/