Hi Nick, How stable has the Mikrotik been running full BGP with the two providers ?
(I read about a memory leak issues, is that why you are using 5.0rc1 ?) We have been considering getting a Mikrotik for such use. Thanks. Faisal Imtiaz Snappy Internet & Telecom On 11/2/2010 9:21 AM, Nick Olsen wrote: > We have two full tables running on mikrotik, in two different locations. > > Running that command > /ip route print count-only where bgp-as-path="1234" > Replacing the AS with "33363" (local cable company). > Doesn't work on either of our routers for some reason (MT 5.0rc1 or 4.4). > > Our router running a core 2 2.93ghz can take two full feeds gets all the > routes in about 4 seconds, And cpu load is idle about 13 seconds later. > However making changes with routing filters take anywhere from 10seconds > to 2 minutes depending on what its doing. > > > Nick Olsen > Network Operations > (855) FLSPEED x106 > > > > ------------------------------------------------------------------------ > *From*: "Kristian Hoffmann" <[email protected]> > *Sent*: Friday, October 29, 2010 11:50 AM > *To*: "WISPA General List" <[email protected]> > *Subject*: [WISPA] Full BGP on RouterOS > > Hi, > > Does anyone have 1-2 full BGP routing tables on a MikroTik router? If > so, what kind of hardware are you running. I'm testing a single feed on > a P3 800. It loads the routes fine, and seems to handle the routes in > stride (all 328659 of them), until you start poking at the routing table > like... > > /ip route print count-only where bgp-as-path="1234" > > An AS that yielded 500 routes took 1-2 minutes at 100% CPU to complete. > Is this "normal" these days, or is significantly greater hardware in > order? I used to have a full feed on a Cisco 3640. It took 5-10 > minutes to load all of the routes after a reload, and it was almost > impossible to log in, high packet loss, etc. during that time. > > So, should it take 10 seconds on real hardware, or is this type of query > always slow? > > Thanks, > > -- > Kristian Hoffmann > System Administrator > [email protected] > http://www.fire2wire.com > > Office - 209-543-1800 | Fax - 209-545-1469 | Toll Free - 800-905-FIRE > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
