We have 4 sector antennas on a couple of our towers but, they're getting too much noise and interference from all over the area. I'm wanted to install a bullet on each tower at 10Mhz so, I can transfer many of our ns2 to it. I can't do it on the panels because we have older equipment that don't support 10mhz. Can't go to 5.8ghz becuase we still don't have any 5.8 radio.
I'm looking for ways to decrease latency which at times are extremely high, over 1000ms (very ridiculous). I have a tower with an omni on it and would like to add another omni on this one to try to do the same as with the others. On Thu, 2010-12-02 at 09:58 -0500, Cameron Kilton wrote: > Why do that next to each other, I don't see the point of two omni's next > to each other and 10mhz and 20 mhz, why not sectors? > > > Thanks, > Cameron Kilton > Project Manager > Midcoast Internet Solutions > http://www.midcoast.com > [email protected] > (207) 594-8277 x 108 > > On 12/2/2010 9:57 AM, Optimum Wireless Services wrote: > > Also, both antennas might be installed on the same tower next to each > > other. > > > > > > On Thu, 2010-12-02 at 10:50 -0400, Optimum Wireless Services wrote: > >> I guess both on different channels: 20mhz on channel 1 and the other on > >> channel 9. > >> > >> > >> On Thu, 2010-12-02 at 08:44 -0600, Cameron Crum wrote: > >>> What channels? > >>> > >>> On Thu, Dec 2, 2010 at 8:39 AM, Optimum Wireless Services > >>> <[email protected]> wrote: > >>> Hello. > >>> > >>> Just a quick stupid question: > >>> > >>> If I have two omni antennas both transmitting at 2.4GHz but, > >>> one with > >>> 10MHz channel width and the other with normal 20MHz width; > >>> would they > >>> interfere with each other? > >>> > >>> > >>> > >>> > >>> -------------------------------------------------------------------------------- > >>> WISPA Wants You! Join today! > >>> http://signup.wispa.org/ > >>> > >>> -------------------------------------------------------------------------------- > >>> > >>> WISPA Wireless List: [email protected] > >>> > >>> Subscribe/Unsubscribe: > >>> http://lists.wispa.org/mailman/listinfo/wireless > >>> > >>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>> > >> > >> > >> > >> -------------------------------------------------------------------------------- > >> WISPA Wants You! Join today! > >> http://signup.wispa.org/ > >> -------------------------------------------------------------------------------- > >> > >> WISPA Wireless List: [email protected] > >> > >> Subscribe/Unsubscribe: > >> http://lists.wispa.org/mailman/listinfo/wireless > >> > >> Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > -------------------------------------------------------------------------------- > > WISPA Wants You! Join today! > > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > > > WISPA Wireless List: [email protected] > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
