What is the reason for the 3W requirement ?
Faisal Imtiaz
Snappy Internet& Telecom
On 1/1/2011 12:43 PM, MDK wrote:
I've had my one test sector up for some time, and then it suddenly
developed ethernet issues.
I changed both cables and switch, and no joy.
I have the replacement rocket, just waiting for the moment I can get
back up there and replace it.
Since this is more common than it should be, I'm going to go whine to
UBNT. I thought mine might a fluke or some kind of odd damage issue,
but apparently not.
Unless someone knows of a managed switch that uses less than 3W power,
I'm stuck with dumb switches...
++++++++++++++++++++++++++++++
Neofast, Inc, Making internet easy
541-969-8200 509-386-4589
++++++++++++++++++++++++++++++
*From:* Chuck Hogg <mailto:[email protected]>
*Sent:* Friday, December 31, 2010 6:47 AM
*To:* [email protected] <mailto:[email protected]> ; WISPA General
List <mailto:[email protected]>
*Subject:* Re: [WISPA] Figuring it out
Try setting the Rocket AP to 10Mbit on the Ethernet and see if you get
the same results. I have had several 100Mbit ethernet issues with
Rockets, only fix I have had has been to put a modified POE RB/750G
near the top of the tower to the Rocket. At 100Mbit they had 7-20%
packet loss. If you have a mikrotik you can also test this using the
ping command from base to top and set the timeout to 75ms. If you
have any packet loss, try setting to 10Mbit and ping again.
Regards,
Chuck
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
WISPA Wireless List: [email protected]
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
