Re: [WISPA] ARC Pilot 900MHz antenna - application question

Thu, 03 Mar 2011 16:16:35 -0800

Are you talking about the

ARC-IP0910S01
Yes I use them.
The package is entirely plastic.  The only holes are for 1/4" or so cable.  I have drilled one to accept an N connector, but I am not sure I would do it again.


On 3/3/2011 6:58 PM, Jerry Richardson wrote:

Anyone using these?

 

Spec'ing a small outdoor WiFi with trees so I'm looking at using 900MHz for BH and 2.4 for client access.

 

Looks like there is plenty of room for an RB411UAHR + XR9 card and pigtails.

 

What is not clear is if there is a place to mount a bulkhead N-Male connector for external 2.4GHz client antenna and a weatherproof DC input connector.

 

anyone?

 

 

 

 




--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

-- 
Scott Reed
Owner
NewWays Networking, LLC
Wireless Networking
Network Design, Installation and Administration
Mikrotik Advanced Certified
www.nwwnet.net
(765) 855-1060

--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: [email protected]

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to