We run everything with AirMax on and WDS enabled. If there is an issue with AirMax and WDS this is the first I have heard of it.
- Jerry From: [email protected] [mailto:[email protected]] On Behalf Of Patrick D. Nix, Jr Sent: Monday, July 25, 2011 11:06 AM To: WISPA General List Subject: Re: [WISPA] Rocket M5 Dish high latency The reason I ask is because we are using WDS on some M2 PtMP installations to relay connections to neighbors that are near other customers. A tech from UBNT told us that WDS is not designed to work with Airmax and it may be causing some issues with throughput especially upload. Has anyone else found this to be the case? We are needing to be able to consistently carry 50mbps or so off of these M5 bridges, is that doable or are we asking too much of this equipment? Thanks, Pat From: [email protected] [mailto:[email protected]] On Behalf Of Josh Luthman Sent: Monday, July 25, 2011 12:35 PM To: WISPA General List Cc: [email protected] Subject: Re: [WISPA] Rocket M5 Dish high latency Always do WDS for backhauls. On Jul 25, 2011 1:31 PM, "Patrick D. Nix, Jr" <[email protected]<mailto:[email protected]>> wrote: > It is routed, using miktrotik routers. Do I use WDS with airmax? I don't > think it is a loop because the other bridges are basically doing the same > thing but not seeing the same problem. They are Trango link 45's > > Sent from my iPad > > On Jul 25, 2011, at 12:04 PM, "Faisal Imtiaz" > <[email protected]<mailto:[email protected]>> wrote: > >> Sounds like you are creating a loop somewhere... >> >> Is this a routed network ? or a bridge Network. >> (Make sure that you have WDS on for fully transparent bridge) >> and also make sure you turn off Enable Discovery in the first tab (picture >> of airmax logo)... (equivalent CDP in the cisco world). >> >> Also keep in mind that if you are using Cisco Switches in your network.. and >> it is a bridge network...... Cisco's by default have STP ON .... not OFF as >> one would expect. >> >> Regards >> Faisal Imtiaz >> Snappy Internet & Telecom >> >> On 7/25/2011 12:40 PM, Greg Ihnen wrote: >>> >>> Isn't -53 a little too hot? >>> >>> Are you using WDS? I don't know if AirMax has changed this but I know one >>> used to need to run with WDS on for a purely transparent bridge. >>> >>> Greg >>> >>> On Jul 25, 2011, at 12:07 PM, Patrick D. Nix, Jr wrote: >>> >>>> We are working on deploying a pair of M5 dishes on our network bridging >>>> point a and point b. When we plug in the network to the dishes, the ping >>>> times climb to 1200+ms on side b of the bridge, and equipment local to the >>>> side b of the bridge, and time out after two or more hops, essentially >>>> bringing the whole network down. We can ping point to point with no >>>> traffic at 2ms. We are replacing a pair of existing bridges from another >>>> manuf. and not seeing this issue over these. Signal is -53dbm on both >>>> sides. -85 noise floor. Any ideas? >>>> >>>> Patrick Nix, Jr., >>>> Computer Network Solutions >>>> CSWEB.NET<http://CSWEB.NET> Internet Services >>>> IT Manager >>>> http://www.cnetworksolutions.com >>>> http://www.csweb.net >>>> (918) 235-0414 >>>> >>>> Attention: This e-mail and any attachments may contain confidential and >>>> privileged information. If you are not the intended recipient, please >>>> notify the sender immediately by return e-mail, delete this e-mail and >>>> destroy any copies. Any dissemination or use of this information by a >>>> person other than the intended recipient is unauthorized and may be >>>> illegal. >>>> >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: [email protected]<mailto:[email protected]> >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: [email protected]<mailto:[email protected]> >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected]<mailto:[email protected]> >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ ________________________________ No virus found in this message. Checked by AVG - www.avg.com<http://www.avg.com> Version: 10.0.1390 / Virus Database: 1518/3787 - Release Date: 07/25/11
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
