On 8/5/2011 8:05 PM, Duncan Scott wrote: > Didn't finish my sentence. A 904 has 4 analog ports but it I believe it > can support a full T1 PRI in addition to that. yes I believe that is correct. the last two digits are the # of fxs ports the box has
leon > > ~Duncan > > On 8/5/2011 3:51 PM, Duncan Scott wrote: >> We've also made use of the TA 900 series stuff for T1 PRI to SIP trunk. >> Works very well. >> >> A 904 has 4 analog ports, >> >> ~Duncan >> >> On 8/5/2011 12:37 PM, Patrick Shoemaker wrote: >>> The folks on the Voiceops list seem to be fans of using Adtran for this: >>> >>> http://www.adtran.com/web/page/portal/Adtran/product/4212904L1/39 >>> >>> Let me know if you try one of those out. I'd like to start doing this too. >>> I'd want the CPE to be as dumb as possible. An asterisk box at the customer >>> seems like a lot of complexity and room for failure modes to me. >>> >>> -- >>> Patrick Shoemaker >>> >>> >>> -----Original Message----- >>> From: [email protected] [mailto:[email protected]] On >>> Behalf Of [email protected] >>> Sent: Friday, August 05, 2011 15:09 >>> To: WISPA General List; [email protected] >>> Subject: [WISPA] "Virtual" T-1 PRI >>> >>> Has anyone set these up for customers? We were thinking about putting an >>> Asterisk box in with a T-1 PRI interface and connecting it to the >>> customer's equipment. >>> Would this work? >>> >>> Any pitfalls? Any affordable turnkey solutions for this? >>> -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
