Admin Tab -> System Settings -> Air Control Server Address Make sure this is an IP address. If not then your CPE will fail to talk to your server. It obviously needs to be the wan port of your router.
I ran into this while listening to the UBNT talk. I was trying to add a bunch of CPE and found that they would not talk to my server behind NAT. I figured since a DNS server is a forced settings item the CPE would do nslookup for the proper server. They don't! ryan On 10/19/2011 8:50 AM, Josh Luthman wrote: > Too many Air products. > > If you're doing a broadcast discovery they need to be in the same > collision domain, same interface of the router, etc. I expect you're > probably trying that and they are on a different collision domain so > what you do is add an IP range in the scan box (ie 10.10.10.0/24 and > 172.16.2.0/24 and 192.168.233.0/24) > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Wed, Oct 19, 2011 at 11:48 AM, Patrick D. Nix, Jr > <[email protected]> wrote: >> Cameras? No cameras, just managing the APs and CPEs. All of my APs are >> added as infrastructure already, still not working. Are there any >> additional ports that need to be open to establish communication? >> >> Patrick Nix, Jr., >> Computer Network Solutions >> CSWEB.NET Internet Services >> IT Manager >> http://www.cnetworksolutions.com >> http://www.csweb.net >> (918) 235-0414 >> >> >> Attention: This e-mail and any attachments may contain confidential and >> privileged information. If you are not the intended recipient, please notify >> the sender immediately by return e-mail, delete this e-mail and destroy any >> copies. Any dissemination or use of this information by a person other than >> the intended recipient is unauthorized and may be illegal. >> >> -----Original Message----- >> From: [email protected] [mailto:[email protected]] On >> Behalf Of Josh Luthman >> Sent: Wednesday, October 19, 2011 10:41 AM >> To: WISPA General List >> Subject: Re: [WISPA] Aircontrol for UBNT >> >> Just add the cameras as infrastructure. It's the easiest way and best >> way (it's documented!!!) >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Wed, Oct 19, 2011 at 11:39 AM, Patrick D. Nix, Jr >> <[email protected]> wrote: >>> Having trouble establishing communication to radios via aircontrol. It is >>> definitely an issue with our firewall (using a imagestream rebel running >>> iptables via powercode) because when I initiate a rebuild the communication >>> comes up after the services process it goes down again. I already have port >>> 22 and port 9080 open. Any ideas? >>> >>> >>> >>> Pat >>> >>> >>> >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: [email protected] >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: [email protected] >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: [email protected] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
