That did it, now I have red and green Thanx NGL -------------------------------------------------- From: "Josh Luthman" <j...@imaginenetworksllc.com> Sent: Wednesday, October 19, 2011 9:50 AM To: "WISPA General List" <wireless@wispa.org> Subject: Re: [WISPA] Aircontrol for UBNT
> Green is connected. > > Red means they are configured to be and once were, but are down (the > radio isn't phoning the server). > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Wed, Oct 19, 2011 at 12:48 PM, ~NGL~ <n...@ngl.net> wrote: >> What are the Green and Red ? I have never seen them. >> NGL >> >> -------------------------------------------------- >> From: "Patrick D. Nix, Jr" <pni...@cnetworksolutions.com> >> Sent: Wednesday, October 19, 2011 9:01 AM >> To: "WISPA General List" <wireless@wispa.org> >> Subject: Re: [WISPA] Aircontrol for UBNT >> >>> :) right, I am able to discover the devices, do firmware updates, but >>> rssi >>> is not visible and the device shows up red, unless I do a rebuild in >>> which >>> case it goes green until the services on the BMU are started and then >>> goes >>> red again. I am on a routed network OSPF my devices are private subnet >>> but route-able from the AirControl server. i.e. I can ping, ssh, web >>> connect to the radios from the aircontrol running on CentOS btw. >>> >>> Patrick Nix, Jr., >>> Computer Network Solutions >>> CSWEB.NET Internet Services >>> IT Manager >>> http://www.cnetworksolutions.com >>> http://www.csweb.net >>> (918) 235-0414 >>> >>> >>> Attention: This e-mail and any attachments may contain confidential and >>> privileged information. If you are not the intended recipient, please >>> notify the sender immediately by return e-mail, delete this e-mail and >>> destroy any copies. Any dissemination or use of this information by a >>> person other than the intended recipient is unauthorized and may be >>> illegal. >>> >>> >>> -----Original Message----- >>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>> Behalf Of Josh Luthman >>> Sent: Wednesday, October 19, 2011 10:51 AM >>> To: WISPA General List >>> Subject: Re: [WISPA] Aircontrol for UBNT >>> >>> Too many Air products. >>> >>> If you're doing a broadcast discovery they need to be in the same >>> collision domain, same interface of the router, etc. I expect you're >>> probably trying that and they are on a different collision domain so >>> what you do is add an IP range in the scan box (ie 10.10.10.0/24 and >>> 172.16.2.0/24 and 192.168.233.0/24) >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> >>> >>> On Wed, Oct 19, 2011 at 11:48 AM, Patrick D. Nix, Jr >>> <pni...@cnetworksolutions.com> wrote: >>>> Cameras? No cameras, just managing the APs and CPEs. All of my APs are >>>> added as infrastructure already, still not working. Are there any >>>> additional ports that need to be open to establish communication? >>>> >>>> Patrick Nix, Jr., >>>> Computer Network Solutions >>>> CSWEB.NET Internet Services >>>> IT Manager >>>> http://www.cnetworksolutions.com >>>> http://www.csweb.net >>>> (918) 235-0414 >>>> >>>> >>>> Attention: This e-mail and any attachments may contain confidential and >>>> privileged information. If you are not the intended recipient, please >>>> notify the sender immediately by return e-mail, delete this e-mail and >>>> destroy any copies. Any dissemination or use of this information by a >>>> person other than the intended recipient is unauthorized and may be >>>> illegal. >>>> >>>> -----Original Message----- >>>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On >>>> Behalf Of Josh Luthman >>>> Sent: Wednesday, October 19, 2011 10:41 AM >>>> To: WISPA General List >>>> Subject: Re: [WISPA] Aircontrol for UBNT >>>> >>>> Just add the cameras as infrastructure. It's the easiest way and best >>>> way (it's documented!!!) >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> >>>> >>>> On Wed, Oct 19, 2011 at 11:39 AM, Patrick D. Nix, Jr >>>> <pni...@cnetworksolutions.com> wrote: >>>>> Having trouble establishing communication to radios via aircontrol. >>>>> It >>>>> is >>>>> definitely an issue with our firewall (using a imagestream rebel >>>>> running >>>>> iptables via powercode) because when I initiate a rebuild the >>>>> communication >>>>> comes up after the services process it goes down again. I already >>>>> have >>>>> port >>>>> 22 and port 9080 open. Any ideas? >>>>> >>>>> >>>>> >>>>> Pat >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -------------------------------------------------------------------------------- >>>>> WISPA Wants You! Join today! >>>>> http://signup.wispa.org/ >>>>> -------------------------------------------------------------------------------- >>>>> >>>>> WISPA Wireless List: wireless@wispa.org >>>>> >>>>> Subscribe/Unsubscribe: >>>>> http://lists.wispa.org/mailman/listinfo/wireless >>>>> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>>> >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
