Yup, I agree 100%. That is one of the many reasons we stopped bridging about 40 sub’s in on our WISP and began NAT’ing at that point…
Regards, David Williamson Owner Custom Computers & Winchester Wireless 2979 Valley Avenue Winchester, VA 22601 http://www.customcomputersva.com <http://www.customcomputersva.com> http://www.winchesterwireless.com <http://www.winchesterwireless.com> Work 1: 540.722.9688 x223 Work 2: 540-665-0800 x223 Toll Free Fax: 877-765-3700 [email protected] <mailto:[email protected]> [email protected] <mailto:[email protected]> From: [email protected] [mailto:[email protected]] On Behalf Of Jason Bailey Sent: Friday, November 11, 2011 6:44 PM To: WISPA General List Subject: Re: [WISPA] Problem with Access to Canopy network If you are bridging radios,whats to stop a client from plugging a router in backwards,or any other ip device? Route at the cpe,192.x or 10.x either way you should be good. --- On Fri, 11/11/11, [email protected] <[email protected]> wrote: From: [email protected] <[email protected]> Subject: Re: [WISPA] Problem with Access to Canopy network To: "WISPA General List" <[email protected]>, "Scottie Arnett" <[email protected]> Date: Friday, November 11, 2011, 6:31 PM Yes, I am bridging the radios, and using static addr's for each customer. -------- Original Message -------- Subject: Re: [WISPA] Problem with Access to Canopy network From: "Scottie Arnett" <[email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> > Date: Fri, November 11, 2011 5:54 pm To: "WISPA General List" <[email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> > So are you bridging the radios? It still sounds like a networking problem instead of the radio. If you are not bridging and using DHCP on the radio, try it in bridge mode and see if that changes anything. Scottie Arnett President Info-Ed, Inc. Electronics and More 931-243-2101 [email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> ----- Original Message ----- From: [email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> To: WISPA General List <http://us.mc1218.mail.yahoo.com/mc/[email protected]> Sent: Friday, November 11, 2011 4:21 PM Subject: Re: [WISPA] Problem with Access to Canopy network Thanks Scottie, Actually what is happening is as follows, all users having this problem are using MS Vista or MS7. We use Static IP's, 192.168.0.nnn or .10.nnn, .15.nnn, .20.nnn - when the assigned IP, mask, gateway and DSN's are entered at the user loc. "local area Connection properties" dialog and saved a yellow triangle w/ a ! appears over the Local Area Connection Icon, lower right, in the "Quick Launch toolbar". When the mouse pointer is rested over the icon the message "Unidentified Network, No Network Access" appears. It seems "Internet Explorer" reads the addressing data as a security risk and will not allow access. Notwithstanding, microsoft's long and arduous efforts to provide us with secure communications, I feel they have overstepped my customers and my own needs for Microsoft Security where internet access is concerned. My question is How Do I over come their enthusiasm with security where our internet access is concerned. Ron Wallace Tigernet Internet trying to claw our way past Microsoft onto the Inet -------- Original Message -------- Subject: Re: [WISPA] Problem with Access to Canopy network From: "Scottie Arnett" <[email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> > Date: Thu, November 10, 2011 8:52 am To: "WISPA General List" <[email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> > Are you doing DHCP with the client radios? If so, I remember some having problems if they used the 169.254.x.x private IP structure. Changing to another private structure solved the problem. Scottie Arnett President Info-Ed, Inc. Electronics and More 931-243-2101 [email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> ----- Original Message ----- From: [email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> To: WISPA General List <http://us.mc1218.mail.yahoo.com/mc/[email protected]> Sent: Thursday, November 10, 2011 7:07 AM Subject: [WISPA] Problem with Access to Canopy network To All, I have a problem with about 15 users not able to access the net. Their PC's network icon, lower right on quick launch toolbar - MS, has a yellow triangle w/!. indicating that their ethernet interface has no access. Each user has MS7. This is specific to one tower location and three of the four sectors, 2 Canopy 900's w/180* sectors, 2 Canopy 2.4's w/ 180* sectors. At first we thought it was specific to MS7 Users, that is still the case. However, not all MS7 users. The setup of all CPE & AP devices is the same. We have reset one 900 to factory default and reconfig'd that device with no affect on the ability to access the net. Any suggestions, advice, questions or direction would be greatly appreciated. Ron Wallace Hahnron, Inc. (Tigernet Internet) [email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> Phone: 517-547-8410 Cel: 517-740-0941 ________________________________ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org <http://signup.wispa.org/> / -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ________________________________ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org <http://signup.wispa.org/> / -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ________________________________ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org <http://signup.wispa.org/> / -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ________________________________ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org <http://signup.wispa.org/> / -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -----Inline Attachment Follows----- -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] <http://us.mc1218.mail.yahoo.com/mc/[email protected]> Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: [email protected] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
