Unfortunately, it’s on the other side of the dish. You’ll have to take the radome cover off to see which polarity it’s set for.
-Patrick *From:* [email protected] [mailto:[email protected]] *On Behalf Of *Scott Reed *Sent:* Thursday, August 30, 2012 8:11 AM *To:* WISPA General List *Subject:* Re: [WISPA] Pac Wireless DA58-29 polarity Which side of the dish is that on? This one is over 100' up and has a radome on it. We are redeploying it, but just a new direction on ht same tower so we don't want to take it apart. We just can't find the records of which way it was installed. On 8/29/2012 6:36 PM, Sam Tetherow wrote: There should be a screw under the attachment nut that fits into a groove on the dish. If the screw is up or down it is vertical, if it is left or right it is horizontal. On 08/29/2012 05:25 PM, Scott Reed wrote: Is this setup as vertical or horizontal polarity. -- Scott Reed Owner NewWays Networking, LLC Wireless Networking Network Design, Installation and Administration Mikrotik Advanced Certified www.nwwnet.net (765) 855-1060 (765) 439-4253 (855) 231-6239 _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2197 / Virus Database: 2437/5232 - Release Date: 08/29/12 -- Scott Reed Owner NewWays Networking, LLC Wireless Networking Network Design, Installation and Administration Mikrotik Advanced Certified www.nwwnet.net (765) 855-1060 (765) 439-4253 (855) 231-6239
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
