A voltage difference with no load? What's causing the drop?

On Thu, Oct 18, 2012 at 10:06 AM, Justin Wilson <[email protected]> wrote:

>         We see 27.3 volts at the battery. And 27.1 volts at the top with
> no load.
>  Obviously load will have an impact on this.
>
>         Justin
>
> -----Original Message-----
> From: Jeromie Reeves <[email protected]>
> Reply-To: WISPA General List <[email protected]>
> Date: Thursday, October 18, 2012 9:15 AM
> To: WISPA General List <[email protected]>
> Subject: Re: [WISPA] Another Ubiquity question
>
> >That depends on wire size. That distance is not going to be ethernet
> >so I will assume #12 AWG, 400ft, copper wire, etc. You should be
> >seeing a 5.6% drop under a 1amp load or about 25v under load.
> >
> >
> >On Thu, Oct 18, 2012 at 6:02 AM, Justin Wilson <[email protected]> wrote:
> >>         27 volts at the base.  DC has very little loss over 400-500 foot
> >> distances.  We are seeing about .1 volt loss on a 400 foot run.
> >>
> >> -----Original Message-----
> >> From: Scott Lambert <[email protected]>
> >> Reply-To: WISPA General List <[email protected]>
> >> Date: Thursday, October 18, 2012 12:16 AM
> >> To: <[email protected]>
> >> Subject: Re: [WISPA] Another Ubiquity question
> >>
> >>>On Wed, Oct 17, 2012 at 10:14:03PM -0400, Justin Wilson wrote:
> >>>>  Many UBNT deployments running at 27volts of clean DC power. Not
> >>>> saying it's ideal but it works.
> >>>
> >>>27v at the ethernet port or 27v at the base of the tower?
> >>>
> >>>--
> >>>Scott Lambert                    KC5MLE                       Unix
> >>>SysAdmin
> >>>[email protected]
> >>>_______________________________________________
> >>>Wireless mailing list
> >>>[email protected]
> >>>http://lists.wispa.org/mailman/listinfo/wireless
> >>>
> >>
> >>
> >> _______________________________________________
> >> Wireless mailing list
> >> [email protected]
> >> http://lists.wispa.org/mailman/listinfo/wireless
> >_______________________________________________
> >Wireless mailing list
> >[email protected]
> >http://lists.wispa.org/mailman/listinfo/wireless
> >
>
>
> _______________________________________________
> Wireless mailing list
> [email protected]
> http://lists.wispa.org/mailman/listinfo/wireless
>
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to