The volt meter is a load, though.

On 10/18/2012 2:57 PM, Chris Fabien wrote:
> No current = no voltage drop. Ohms Law.
>
> On Thu, Oct 18, 2012 at 3:38 PM, Jeromie Reeves <jree...@18-30chat.net> wrote:
>> The resistance of the length of wire.
>>
>> On Thu, Oct 18, 2012 at 11:03 AM, Greg Ihnen <os10ru...@gmail.com> wrote:
>>> A voltage difference with no load? What's causing the drop?
>>>
>>>
>>> On Thu, Oct 18, 2012 at 10:06 AM, Justin Wilson <li...@mtin.net> wrote:
>>>>          We see 27.3 volts at the battery. And 27.1 volts at the top with
>>>> no load.
>>>>   Obviously load will have an impact on this.
>>>>
>>>>          Justin
>>>>
>>>> -----Original Message-----
>>>> From: Jeromie Reeves <jree...@18-30chat.net>
>>>> Reply-To: WISPA General List <wireless@wispa.org>
>>>> Date: Thursday, October 18, 2012 9:15 AM
>>>> To: WISPA General List <wireless@wispa.org>
>>>> Subject: Re: [WISPA] Another Ubiquity question
>>>>
>>>>> That depends on wire size. That distance is not going to be ethernet
>>>>> so I will assume #12 AWG, 400ft, copper wire, etc. You should be
>>>>> seeing a 5.6% drop under a 1amp load or about 25v under load.
>>>>>
>>>>>
>>>>> On Thu, Oct 18, 2012 at 6:02 AM, Justin Wilson <li...@mtin.net> wrote:
>>>>>>          27 volts at the base.  DC has very little loss over 400-500
>>>>>> foot
>>>>>> distances.  We are seeing about .1 volt loss on a 400 foot run.
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Scott Lambert <lamb...@lambertfam.org>
>>>>>> Reply-To: WISPA General List <wireless@wispa.org>
>>>>>> Date: Thursday, October 18, 2012 12:16 AM
>>>>>> To: <wireless@wispa.org>
>>>>>> Subject: Re: [WISPA] Another Ubiquity question
>>>>>>
>>>>>>> On Wed, Oct 17, 2012 at 10:14:03PM -0400, Justin Wilson wrote:
>>>>>>>>   Many UBNT deployments running at 27volts of clean DC power. Not
>>>>>>>> saying it's ideal but it works.
>>>>>>> 27v at the ethernet port or 27v at the base of the tower?
>>>>>>>
>>>>>>> --
>>>>>>> Scott Lambert                    KC5MLE                       Unix
>>>>>>> SysAdmin
>>>>>>> lamb...@lambertfam.org
>>>>>>> _______________________________________________
>>>>>>> Wireless mailing list
>>>>>>> Wireless@wispa.org
>>>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Wireless mailing list
>>>>>> Wireless@wispa.org
>>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>> _______________________________________________
>>>>> Wireless mailing list
>>>>> Wireless@wispa.org
>>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>>>
>>>>
>>>> _______________________________________________
>>>> Wireless mailing list
>>>> Wireless@wispa.org
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>>>
>>> _______________________________________________
>>> Wireless mailing list
>>> Wireless@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>
>> _______________________________________________
>> Wireless mailing list
>> Wireless@wispa.org
>> http://lists.wispa.org/mailman/listinfo/wireless
> _______________________________________________
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>

_______________________________________________
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to