"If you’re lucky, a bulge is as good as a schematic."

Maybe. But I wouldn't use that line until at least the third date ;-)
  ----- Original Message ----- 
  From: Jonathan Schmidt 
  To: WISPA General List 
  Sent: Thursday, January 10, 2013 4:56 PM
  Subject: Re: [WISPA] Ubiquiti ERLite-3 3-port Router


  A trusted supplier also has suppliers who have suppliers.  We had over a 
dozen Princeton monitors that all quit within 6 months of each other after 4 
years.  As they piled up, one of our engineer-programmers had an epiphany that 
it might be one common problem…looking at the stack of monitors 6’ high.  It 
was caps, of course.  

   

  Opening them up, you could see the bulge in the top of one or two caps.  
There were 4 or 5 of the same kind and one or the other were blown in the first 
3.  He got to the point where he could fix a monitor in 8 minutes…and we got 
them all back.  If you’re lucky, a bulge is as good as a schematic.

   

  This time it wasn’t the supplier.  They were all running a volt or two above 
the rating.  It was the designer.

   

  . . . j o n a t h a n

   

   

  From: [email protected] [mailto:[email protected]] On 
Behalf Of Steve Nedolast
  Sent: Thursday, January 10, 2013 5:04 PM
  To: WISPA General List
  Subject: Re: [WISPA] Ubiquiti ERLite-3 3-port Router

   

  As well as samsung recently.

  Blair Davis <[email protected]> wrote:

  BTW, as a electronics teck, who still repairs DLP and Rear Projection TV's as 
a hobby, MikroTik ain't the only people who got bit by that capacitor issue...

  You can add Thompson and Mitsubishi to the list as well.  Two of the big boys 
in electronics.

  Like UBNT with the ToughCable, sometimes your trusted supplier ****s you.

  Live and learn.

  --



  On 1/9/2013 8:02 AM, Matt Hoppes wrote:

    Ok. Now that I'm on a larger device than my phone let me elaborate. 

     

    Yes. Beta units are the same as what are shipping to distributors. Why 
would they be any different?  That wouldn't make any sense and would go against 
every previous beta Ubiquiti has ever done. 

     

    Being in Latvia RMAs with MT are a pain in the rear and take months to get 
completed - usually involving sending it direct yourself or back to your 
distributor who batches them back to Latvia.  With Ubiquiti, being US based, 
you just send the device back to SJ and you get a new one. 

     

    Support?  You must have a secret number for MT support. The only way I know 
to get support on MT is to go to the MT forums where you'll get beat up... And 
heaven forbid you find a bug.....you'll get tarred and feathered. And certainly 
no discussion of competitors products on their forums because that would be a 
bad thing.   I think it speaks worlds that MT uses sometimes come over to the 
Ubiquiti forum to get help ---- and people help them!

     

    Ubiquiti has phone support, a very active FRIENDLY forum. When was the last 
time you saw a MT firmware developer on the forum answering questions?

     

    And finally.....the Ubiquiti router doesn't blow caps after being in 
service for a year. ..... Oh it wait....  That issue was never acknowledged was 
it?

    Sent from my iPad


    On Jan 8, 2013, at 22:35, Josh Luthman <[email protected]> wrote:

      I'm not bitter, I just don't see their advantage.  You can't honestly 
expect support to exceed that of Mikrotik.  Features are better in Mikrotik.  
Price doesn't have a huge gap between them. 

       

      Not exactly sure how you've had them running for months when they haven't 
even started shipping.  Unless you got a beta unit or something, which is 
probably not the same product that you'd buy from a distributor.


      Simple question:  What does the Ubiquiti router have over my Mikrotik?  
Now what's the answer...




      Josh Luthman
      Office: 937-552-2340
      Direct: 937-552-2343
      1100 Wayne St
      Suite 1337
      Troy, OH 45373

       

      On Tue, Jan 8, 2013 at 10:01 PM, Matt Hoppes <[email protected]> 
wrote:

      Wow, josh. Why are you so bitter towards these things?  Many of us have 
had them in heavy production without issue for months. 

      Sent from my iPad


      On Jan 8, 2013, at 21:05, Josh Luthman <[email protected]> 
wrote:

        Build a Win ME machine.  Put it on some batteries in the corner.  Get 
your 9 mo uptime.

        Josh Luthman
        Office: 937-552-2340
        Direct: 937-552-2343
        1100 Wayne St Suite 1337
        Troy, OH 45373

        On Jan 8, 2013 8:56 PM, "Mike Hammett" <[email protected]> wrote:

        Do you have anything to base that on?

        I have both MT and UBNT devices that have been up without missing a 
beat since they last had firmware upgraded 9+ months ago.

        Now I know UBNT will have big shoes to fill if they plan on unseating 
Mikrotik, but give them a couple years and I think they'll be alright. I likely 
won't use the first generation in production.



        -----
        Mike Hammett
        Intelligent Computing Solutions
        http://www.ics-il.com

        ----- Original Message -----
        From: "Josh Luthman" <[email protected]>
        To: "WISPA General List" <[email protected]>
        Sent: Tuesday, January 8, 2013 4:56:10 PM
        Subject: Re: [WISPA] Ubiquiti ERLite-3 3-port Router



        I have no reason to buy them at all. They're going to be less reliable 
than Mikrotik (which is really really bad) and not be as good software wise. 
Where does this device fit?


        Their ad suggests it is to replace a Cisco. Ya right.


        Josh Luthman
        Office: 937-552-2340
        Direct: 937-552-2343
        1100 Wayne St
        Suite 1337
        Troy, OH 45373


        On Tue, Jan 8, 2013 at 5:33 PM, Mike Hammett < [email protected] 
> wrote:


        That's an awfully bold statement. How come?



        -----
        Mike Hammett
        Intelligent Computing Solutions
        http://www.ics-il.com



        ----- Original Message -----
        From: "Christian Palecek" < [email protected] >
        To: "WISPA General List" < [email protected] >
        Sent: Tuesday, January 8, 2013 4:30:22 PM
        Subject: Re: [WISPA] Ubiquiti ERLite-3 3-port Router

        I wouldn't touch one with a ten foot pole.

        Sent from my Verizon Wireless smartphone

        Jon Auer < [email protected] > wrote:

        >Streakwave is supposedly shipping orders placed back when it was 
announced.
        >Mine hasn't arrived yet :-(
        >On Jan 8, 2013 12:57 PM, "Steve Barnes" < [email protected] > wrote:
        >
        >> That’s the new UBNT Edge Router line. I was not aware that they have
        >> actually shipped to general public yet. ****
        >>
        >> ** **
        >>
        >> UBNT is trying to get into the Router market as well. Time will 
tell.****
        >>
        >> ** **
        >>
        >> Steve Barnes****
        >>
        >> General Manager****
        >>
        >> PCS-WIN / RC-WiFi < http://www.rcwifi.com/ >****
        >>
        >> ** **
        >>
        >> *From:* [email protected] [mailto: 
[email protected] ] *On
        >> Behalf Of *~NGL~
        >> *Sent:* Tuesday, January 08, 2013 1:43 PM
        >> *To:* WISPA General List
        >> *Subject:* [WISPA] Ubiquiti ERLite-3 3-port Router****
        >>
        >> ** **
        >>
        >> Anyone have any experience with this router?****
        >>
        >> NGL****
        >>
        >> ****
        >>
        >> If you can read this Thank A Teacher.
        >> And if it's in English Thank A Soldier!****
        >>
        >> ** **
        >>
        >> _______________________________________________
        >> Wireless mailing list
        >> [email protected]
        >> http://lists.wispa.org/mailman/listinfo/wireless
        >>
        >>
        >
        >_______________________________________________
        >Wireless mailing list
        > [email protected]
        > http://lists.wispa.org/mailman/listinfo/wireless
        _______________________________________________
        Wireless mailing list
        [email protected]
        http://lists.wispa.org/mailman/listinfo/wireless
        _______________________________________________
        Wireless mailing list
        [email protected]
        http://lists.wispa.org/mailman/listinfo/wireless


        _______________________________________________
        Wireless mailing list
        [email protected]
        http://lists.wispa.org/mailman/listinfo/wireless
        _______________________________________________
        Wireless mailing list
        [email protected]
        http://lists.wispa.org/mailman/listinfo/wireless

        _______________________________________________
        Wireless mailing list
        [email protected]
        http://lists.wispa.org/mailman/listinfo/wireless


      _______________________________________________
      Wireless mailing list
      [email protected]
      http://lists.wispa.org/mailman/listinfo/wireless

       

      _______________________________________________
      Wireless mailing list
      [email protected]
      http://lists.wispa.org/mailman/listinfo/wireless






_______________________________________________Wireless mailing 
[email protected]http://lists.wispa.org/mailman/listinfo/wireless



-- West Michigan Wireless ISPAllegan, Michigan  49010269-686-8648 A Division 
of:Camp Communication Services, 
INC------------------------------------------------------------------------------Wireless
 mailing [email protected]http://lists.wispa.org/mailman/listinfo/wireless
  -- 
  Sent from my Android phone with K-9 Mail. Please excuse my brevity.



------------------------------------------------------------------------------


  _______________________________________________
  Wireless mailing list
  [email protected]
  http://lists.wispa.org/mailman/listinfo/wireless
_______________________________________________
Wireless mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/wireless

Reply via email to