I would expect that her would be some side lobe interference. If they were more like 40 Degrees then you would probably be fine. But 11 is really close. What Kind of distances from A to B and A to C. The closer the better, the further its going to get more tricky.
Steve Barnes General Manager PCS-WIN / RC-WiFi -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Paolo Di Francesco Sent: Monday, February 04, 2013 8:49 AM To: WISPA General List ([email protected]) Subject: [WISPA] Ubiquiti airfiber on the same tower... Hi All I was wondering what is your experience on Airfiber. In particular my question is if the following scenario could work or not work in your opinion/experience On tower at LocationA there are two Airfiber pointing at the same direction LocationB and LocationC, more or less. On the tower at LocationA, the two airfibers are mounted at let's say 1-2 meters distance (horizontal and vertical) and 10 degrees of difference in the 2 directions LocationB and LocationC. LocationB and LocationC are two other towers both pointing at LocationA. I am wondering if at 24Ghz I could see some interference or not , in this situaitons Thank you in advance -- Ing. Paolo Di Francesco Level7 s.r.l. unipersonale Sede operativa: Largo Montalto, 5 - 90144 Palermo C.F. e P.IVA 05940050825 Fax : +39-091-8772072 assistenza: (+39) 091-8776432 web: http://www.level7.it _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
