It might also be the Ethernet run causing interference.
On Thursday, October 31, 2013, Chris Fabien wrote: > We have a tower site where we agreed to allow a friend of the tower owner > to install a 2-way radio repeater. I believe it is using a frequency around > 450 mhz. We installed their omni antenna on a 3ft stand off close to a UBNT > Nanobridge M2 radio which is pointing directly away from the omni - omni is > about 4ft behind the dish. > > They are complaining about loud noise/interference when using the repeater > from a handheld. From a mobile(vehicle) radio it works fine. What's the > solution to fix this? Move the antennas further apart? Their radio supplier > is suggesting that their omni should be installed at top of tower above all > our equipment. We were reserving the use of the top mast mount for future > needs, and don't want to do this. > > >
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
