The MPPT-45 doesn't have an Ethernet interface, so you would need an additional device to bridge ModBus.
--Eric From: [email protected] [mailto:[email protected]] On Behalf Of Mike Lyon Sent: Friday, November 08, 2013 9:35 AM To: WISPA General List Subject: Re: [WISPA] Network enabled solar controllers I'm looking at the MPPT-45... On Fri, Nov 8, 2013 at 9:32 AM, Eric Flanery <[email protected]<mailto:[email protected]>> wrote: We use the MorningStar TriStar MPPT-60. ModBus over TCP was a bit of a pain to get working; but once it is setup, it works great. We did have a problem where the units would revert to their default IP addresses, months later, for no apparent reason. All other settings stuck. We worked around this by just letting them keep their default IP, and re-mapped it via NAT at the router. No problems on the charging side, and the custom cutoff feature is awesome. --Eric -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Mike Lyon Sent: Friday, November 08, 2013 7:55 AM To: WISPA General List Subject: [WISPA] Network enabled solar controllers What is everyone using? -Mike _______________________________________________ Wireless mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/wireless _______________________________________________ Wireless mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/wireless -- Mike Lyon 408-621-4826 [email protected]<mailto:[email protected]> http://www.linkedin.com/in/mlyon
_______________________________________________ Wireless mailing list [email protected] http://lists.wispa.org/mailman/listinfo/wireless
