Cisco ME3400. There is a 12-port Ethernet/sfp combo version. Bryce Duchcherer NETAGO
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Colton Conor Sent: Wednesday, November 2, 2016 12:44 To: WISPA General List <wireless@wispa.org> Subject: [WISPA] MDU Ethernet Switch I am in need of a recommendation for a small Ethernet switch for an MDU applications. This is a garden style community where each building has between 4 to 8 units inside of the building. There are 15 buildings on the property. We would run a new CAT6 drop from a central point in the building to each unit. This central point would either be in the attic, or on the side of the exterior wall in some type of enclosure. Then we would run fiber uplink from each building's switch to a headend room. The headend room would have the aggergation fiber switch, a router, and an uplink to the internet. We would hand a copper Ethernet hand off to the client in a unit, and then the could use whatever router they wanted, or plug their computer in directly to the wall. I think all I need is a switch per building (not a router), and ideally this switch needs to have: - At Least 1 SFP fiber uplink port. 2 would be nice for daisy chaining, but not required. - 4 to 8 Copper Gigabit Ports. I don't need POE output power on these ports. - SNMP For remote monitoring - CLI or some sort of web based remote management - Temperature Hardened or able to be in a hot attic - Some sort of L2 port isolation or private vlans where other subscribers can see each other. All traffic goes in and out of uplink - Rate limiting for each individual port - Full duplex speed and wireline switching is preferred. - We be nice to be remotely powered using PoE in, but not required. Might be hard however to get power to the attic or side of building. So far, options that come to mind are: https://routerboard.com/RB260GS for $36. Looks like a good option, but not sure about SwitchOS. Worried Mikrotik won't continue to improve switchOS. Feature set seems limited. Not sure about port isolation options? Says it support Poe-In for power. Temp range looks good. No CLI. https://www.ubnt.com/edgemax/edgerouter-x-sfp/ $72. Double the price of the Mikrotik. OS seems more robust. Seem more like a router than switch so might be overkill for application. NO Poe-IN power option, but could I used a passive poe injector to still power it remotely? https://www.ubnt.com/edgemax/edgepoint/ The EP-R6 is about $105. Looks like its basically the edgerouter-x-sfp but in an outdoor case, and this model supports PoE Input. This smaller unit doesn't seem to have any fiber slack management like the other units in the edgepoint lineup. Includes POE injector to power unit. I was thinking maybe a GPON ONT per building that has 4 to 8 Ethernet ports on it. However, there are no small GPON OLTs out there. Plus, most outdoor ONT's are like $250+ each. What else is out there? I would say price range would be sub $200 per building max.
_______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless