On 12/12/2016 1:58 PM, Art Stephens wrote: > Just starting out using cambium ePMP gear. For configuring multiple > APs on a single tower the frequency reuse requires all APs on the same > tower to have their Subscriber Module Target Receive Levels set the same. > > What are the pros and cons between SMTRL of -60 and say -80? The ideal signal range is around -60dBm, any stronger isn't necessary.
The SMTRL will cause the subscriber to back of TX power until it meets the Target Receive Level. I would not recommend a Target Receive Level any lower than -65dBm, or your network will probably not work very well. -- ----------------------------------------------- - Nick Bright - - Vice President of Technology - - Valnet -=- We Connect You -=- - - Tel 888-332-1616 x 315 / Fax 620-331-0789 - - Web http://www.valnet.net/ - ----------------------------------------------- - Are your files safe? - - Valnet Vault - Secure Cloud Backup - - More information & 30 day free trial at - - http://www.valnet.net/services/valnet-vault - ----------------------------------------------- This email message and any attachments are intended solely for the use of the addressees hereof. This message and any attachments may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system. _______________________________________________ Wireless mailing list Wireless@wispa.org http://lists.wispa.org/mailman/listinfo/wireless
