Hi, You could start by reading part II of the developer guide http://www.wireshark.org/docs/wsdg_html_chunked/PartDevelopment.html even though that is not complete. It does however touch on the questions you ask.
Thanx, Jaap Yuming fang wrote: > Hi, all, > > I am adding a new protocol to wireshark. When I add the new protocol, > there are some basic questions I could not understand as follows. > > (1) When capturing data from netcard, how does the wireshark choose the > protocol dissector to process the data? For example, if wireshark > receive the tcp data, how could it know these data is tcp data and thus > choose tcp protocol dissector to process these data? Could anyone give > me some explaination on the data flow from the netcard to the display in > wireshark? > > (2) I want to use wireshark to process the LTE data(Actually mainly > display the LTE data format in wireshark). Now we have written some > code. However, we have not the LTE netcard. So I want to send the LTE > data through TCP socket(Port is 9999) and thus wireshark could receive > the LTE data through the TCP(Port:9999). Now I could get these LTE data, > but how could I let the wireshark display the LET data format like a > tree? How could I add the LTE code into the TCP(Port:9999) to process > the LET data? > > I will appreciate it greatly if someone could give me some advice on > these questions. > > Best wishes, > Yuming > ___________________________________________________________________________ Sent via: Wireshark-dev mailing list <[email protected]> Archives: http://www.wireshark.org/lists/wireshark-dev Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev mailto:[email protected]?subject=unsubscribe
