You're using a preview build which may have problems. I had a similar problem with build 058 on Mac OS X that appeared to be caused by incorrect permissions on some of the configuration files (namely objects.ini and handlers.ini). It also appears that these incorrect files were created by the 058 installer. There is a new 'preview' build available on the Witango site, build 059 for OS X that I believe addresses the problem. You might want to stick with the production build which, on Windosw is 054.
Hope this helps, Steve Smith Oakbridge Information Solutions Office: (519) 624-4388 GTA: (416) 606-3885 Fax: (519) 624-3353 Cell: (416) 606-3885 Email: [EMAIL PROTECTED] Web: http://www.oakbridge.ca > -----Original Message----- > From: Ben Johansen [mailto:[EMAIL PROTECTED] > Sent: June 3, 2003 1:39 PM > To: [EMAIL PROTECTED] > Subject: RE: Witango-Talk: Can't instantiate COM under 5.0.1.058 > > > You might want to check to see what DLL is actually sitting there :-) > I could send you the 601 version off list if you want > > Ben Johansen - http://www.pcforge.com > Authorized Witango Reseller http://www.pcforge.com/WitangoGoodies.htm > Authorized MDaemon Mail Server Reseller > http://www.pcforge.com/AltN.htm > > > -----Original Message----- > From: Simon Boddy [mailto:[EMAIL PROTECTED] > Sent: Tuesday, June 03, 2003 10:30 AM > To: [EMAIL PROTECTED] > Subject: RE: Witango-Talk: Can't instantiate COM under 5.0.1.058 > > Thanks Ben > I've toggled 'SupportsScanning' with no effect, and full path was set on > install. I'm curious why both you and Gauthier have W3HCM601.DLL as your > COM handler. 058 installed w3hcm501.dll, which looks like a back > version, but then I might be grasping at straws. > > Thanks, Simon. > > -----Original Message----- > From: Ben Johansen [mailto:[EMAIL PROTECTED] > Sent: 03 June 2003 17:39 > To: [EMAIL PROTECTED] > Subject: RE: Witango-Talk: Can't instantiate COM under 5.0.1.058 > > > I thought LoadHandler=1 was for the Dev Studio Side > > Try: SupportsScanning=1 > And also make sure the full ServerPath is stated > > [COM] > ShortName=COM / DCOM Objects > SupportsScanning=0 > ServerPath=C:\\Witango\\W3HCM601.DLL > > [JAVABEAN] > ShortName=JavaBeans > SupportsScanning=1 > ServerPath=C:\\Witango\\W3HBN601.DLL > > Ben Johansen - http://www.pcforge.com > Authorized Witango Reseller http://www.pcforge.com/WitangoGoodies.htm > Authorized MDaemon Mail Server Reseller > http://www.pcforge.com/AltN.htm > > > -----Original Message----- > From: Simon Boddy [mailto:[EMAIL PROTECTED] > Sent: Tuesday, June 03, 2003 9:33 AM > To: [EMAIL PROTECTED] > Subject: Witango-Talk: Can't instantiate COM under 5.0.1.058 > > Hi list. > > Clean install of latest v5 (5.0.1.058) on a fresh win2000 advanced > server box. Getting the old '-808 cannot create native object' for all > COM calls. > Can add and browse the objects fine in the editor. LoadHandler=1 is set > in handlers.ini. Nothing suspect in objects.ini or applications.ini. The > following tell-tale lines in the events log server start up... > > [ 1036] 2003-06-03 16:51:51 START WARNING Cannot initialize the > "COM" plug-in. The plug-in is disabled. > [ 1036] 2003-06-03 16:51:51 START WARNING Cannot initialize the > "JAVABEAN" plug-in. The plug-in is disabled. > > > What is the story??? > Thanks in advance for any help. Simon Boddy. > > > ******************************************************************** > This message is intended only for the use of the person(s) ("the > intended > recipient(s)") to whom it is addressed. It may contain information which > is > privileged and confidential within the meaning of applicable law. If you > > are not the intended recipient, please contact the sender as soon as > possible. The views expressed in this communication may not necessarily > be the views held by LGCSB (Local Government Computer Services Board). > > Any attachments have been checked by a virus scanner and appear to be > clean. > Please ensure that you also scan all messages, as LGCSB does not accept > any liability for contamination or damage to your systems. > ******************************************************************** > > ________________________________________________________________________ > TO UNSUBSCRIBE: Go to http://www.witango.com/maillist.taf > > ________________________________________________________________________ > TO UNSUBSCRIBE: Go to http://www.witango.com/maillist.taf > ________________________________________________________________________ > TO UNSUBSCRIBE: Go to http://www.witango.com/maillist.taf > > ________________________________________________________________________ > TO UNSUBSCRIBE: Go to http://www.witango.com/maillist.taf ________________________________________________________________________ TO UNSUBSCRIBE: Go to http://www.witango.com/maillist.taf
