snap20051114 (wmii-3 and p9) gives a similar error at the same point of
loading in IntelliJ. Not sure if the wmir errors are due to my just
installing wmii-3/p9 for the first time...
--- snip ---
GetModeLine - scrn: 0 clock: 0
GetModeLine - hdsp: 1600 hbeg: 0 hend: 0 httl: 0
vdsp: 1200 vbeg: 0 vend: 0 vttl: 0 flags: 0
wmir: error: open /wm/page/sel/mode/name: file does not exist
wmir: error: open /wm/page/sel/name: file does not exist
rc (/usr/local/9/bin/rc): null list in concatenation
wmiiwm: fatal errorX Error of failed request: BadValue (integer
parameter out of range for operation)
Major opcode of failed request: 12 (X_ConfigureWindow)
Value in failed request: 0x0
Serial number of failed request: 922
Current serial number in output stream: 926
waiting for X server to shut down X connection to :0.0 broken (explicit
kill or server shutdown).
X connection to :0.0 broken (explicit kill or server shutdown).
X connection to :0.0 broken (explicit kill or server shutdown).
--- snip ---
Steve
On Mon, 2005-12-12 at 16:51, Anselm R. Garbe wrote:
> On Mon, Dec 12, 2005 at 04:45:22PM -0600, Steve Hoffman wrote:
> > Anselm,
> >
> > No core file is produced (checked the whole filesystem for one).
> > The only thing I get is this:
> >
> > --- snip---
> > Starting wmii utilities ...GetModeLine - scrn: 0 clock: 0
> > GetModeLine - hdsp: 1600 hbeg: 0 hend: 0 httl: 0
> > vdsp: 1200 vbeg: 0 vend: 0 vttl: 0 flags: 0
> > done.
> > wmiiwm: fatal errorX Error of failed request: BadValue (integer
> > parameter out of range for operation)
> > Major opcode of failed request: 12 (X_ConfigureWindow)
> > Value in failed request: 0x0
> > Serial number of failed request: 1382
> > Current serial number in output stream: 1386
> > Stopping wmii utilities ...done.
> >
> > waiting for X server to shut down
> > --- snip ---
> >
> > It appears to be when loading a project IntelliJ decides it is taking
> > "too long" so it switches the smaller progress window to a larger window
> > that has "tips" in the bottom part. It is at this point X gets killed.
> >
> > Any other ideas?
>
> Ok, then wmiiwm is exited by the default X error handler,
> because it seems that the associated window is configure with an
> 0-area geometry. Could you please recheck with 20051114 snap?
>
> Regards,
_______________________________________________
[email protected] mailing list
http://wmii.de/cgi-bin/mailman/listinfo/wmii
