Just checked and the wmir and rc errors about null list in concat are part of the startup before I start IntelliJ
Steve On Mon, 2005-12-12 at 17:15, Steve Hoffman wrote: > snap20051114 (wmii-3 and p9) gives a similar error at the same point of > loading in IntelliJ. Not sure if the wmir errors are due to my just > installing wmii-3/p9 for the first time... > > --- snip --- > GetModeLine - scrn: 0 clock: 0 > GetModeLine - hdsp: 1600 hbeg: 0 hend: 0 httl: 0 > vdsp: 1200 vbeg: 0 vend: 0 vttl: 0 flags: 0 > wmir: error: open /wm/page/sel/mode/name: file does not exist > wmir: error: open /wm/page/sel/name: file does not exist > rc (/usr/local/9/bin/rc): null list in concatenation > wmiiwm: fatal errorX Error of failed request: BadValue (integer > parameter out of range for operation) > Major opcode of failed request: 12 (X_ConfigureWindow) > Value in failed request: 0x0 > Serial number of failed request: 922 > Current serial number in output stream: 926 > > waiting for X server to shut down X connection to :0.0 broken (explicit > kill or server shutdown). > X connection to :0.0 broken (explicit kill or server shutdown). > X connection to :0.0 broken (explicit kill or server shutdown). > --- snip --- > > Steve > On Mon, 2005-12-12 at 16:51, Anselm R. Garbe wrote: > > On Mon, Dec 12, 2005 at 04:45:22PM -0600, Steve Hoffman wrote: > > > Anselm, > > > > > > No core file is produced (checked the whole filesystem for one). > > > The only thing I get is this: > > > > > > --- snip--- > > > Starting wmii utilities ...GetModeLine - scrn: 0 clock: 0 > > > GetModeLine - hdsp: 1600 hbeg: 0 hend: 0 httl: 0 > > > vdsp: 1200 vbeg: 0 vend: 0 vttl: 0 flags: 0 > > > done. > > > wmiiwm: fatal errorX Error of failed request: BadValue (integer > > > parameter out of range for operation) > > > Major opcode of failed request: 12 (X_ConfigureWindow) > > > Value in failed request: 0x0 > > > Serial number of failed request: 1382 > > > Current serial number in output stream: 1386 > > > Stopping wmii utilities ...done. > > > > > > waiting for X server to shut down > > > --- snip --- > > > > > > It appears to be when loading a project IntelliJ decides it is taking > > > "too long" so it switches the smaller progress window to a larger window > > > that has "tips" in the bottom part. It is at this point X gets killed. > > > > > > Any other ideas? > > > > Ok, then wmiiwm is exited by the default X error handler, > > because it seems that the associated window is configure with an > > 0-area geometry. Could you please recheck with 20051114 snap? > > > > Regards, > > _______________________________________________ > [email protected] mailing list > http://wmii.de/cgi-bin/mailman/listinfo/wmii _______________________________________________ [email protected] mailing list http://wmii.de/cgi-bin/mailman/listinfo/wmii
