Hi Joe ....i have foud a way to get it to work ...i enabled the RTS box
...i have never had to do that before....i use a USB/serial adapter from
the computer to the rig...the FT450D has RS232 port on the rear panel.
+2khz is also working
Thanks
David VK4BDJ
On 24/07/13 06:55, Joe Taylor wrote:
David --
VK4BDJ wrote:
Hi Joe.....with this revision i have completly lost CAT control on my
FT450D
therefore the +2khz does not work
CAT control in r3500 works OK here, both direct to my TS-2000 and via
Commander in Windows, and direct to the TS-2000 in Linux. That's all I
can easily test.
Changes were made in two areas:
-- the DTR/RTS checkbox is now two separate checkboxes
-- multiple tries at polling the radio for frequency are now made in
rigclass.cpp rather than mainwindow.cpp.
Can you diagnose your problem any further?
Important question: does anyone else observe a problem with CAT
control in revision 3500 ?
-- Joe, K1JT
_______________________________________________
Wsjt-devel mailing list
Wsjt-devel@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/wsjt-devel
_______________________________________________
Wsjt-devel mailing list
Wsjt-devel@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/wsjt-devel
