On 23/07/2013 22:08, David wrote: Hi David,
Hi Joe ....i have foud a way to get it to work ...i enabled the RTS box ...i have never had to do that before....i use a USB/serial adapter from the computer to the rig...the FT450D has RS232 port on the rear panel.
I'm surprised you need to switch RTS on permanently with a USB interface. That is normally only needed with an interface that uses the RTS line to get power, USB devices are usually powered from the USB bus.
I suspect your radio may be set up for hardware flow control on the RS-232 port, if that were the case then the correct setting would be "Hardware" in the handshaking box and possibly checking the DTR box.
If you can confirm that and test if that works for you I would appreciate it.
+2khz is also working Thanks David VK4BDJ
73 Bill G4WJS. _______________________________________________ Wsjt-devel mailing list Wsjt-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/wsjt-devel
