On 08/03/2014 06:14 PM, Patrick wrote: > First, I have a TS2000 connected via a Microkey II, I am using mhuxd and > rigctld to control the tranceiver, and all is working there.
In previous postings, I have mentioned that additional arguments may become necessary when using hamlib. Please allow me to point to the arguments which fldigi is using with rigcat and with the TS-2000: Timeout: 50 Retries: 4 Write delay: 25 Baudrate: 9600 RTSCTS: false ECHO: none CMDPTT: none This suggest to me that the following command may work while starting rigctld: rigctld -m214 --set-conf=rig_pathname=/dev/ttyUSB0, serial_speed=9600,dcd_type=NONE,timeout=50,retry=4,write_delay=25, post_write_delay=50,itu_region=1 Just an idea... Best 88 de Claude ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
