richard stanley <m0clz1@...> writes: Hi Richard: > > I have run most revisions since r6373 and at the moment am running r4848 and > never > had a crash while decoding yet.
Same here - never had any problems at all with any of the 3 versions I've used, until last week. Then all "went south" on me. I'd like to try r4848 if I can find it. > > I have windows 7 with all updates installed. It is a six core amd unit with > 8GB ram. > > WSJTX is set for decode deepest and the waterfall to bins/pixels 3 and the > default > jt65 2500 jt9 Configuration wise, we are similar save for Bins/Pixels 4 here - to get entire audio bandwidth displayed on the waterfall. > > Using split mode on my ic-7000 I can operate anywhere displayed on the > waterfall with no issues. Using Kenwood TS-570D but PTT with VOX - no CAT. (Not that it makes much of a difference.) > > The system is left on most of the time, with random downtimes to allow the > missus to run her > version or to see if there are any issues with the latest builds. > > Your 1st update is for explorer which I don't use anyway (I use firefox and > chrome) though as explorer > is integral to windows I would think I have the update. Yes, it's to fix some problems that appeared in IE11 operation after an update installed about a week before it. It also has a few other "tricks." > > The 2nd update seems to be causing issues for some and nothing for others > regardless of if they use > wsjtx or any ham related software. That is a probability that I have thought as well. One of the effects, though, is slower decoding on WSJT-X (at least here at this QTH). > > I'm wondering if the issues are hardware/software rather than just software > ?, not saying that there is > a problem with your hardware but there are so many pc configurations it > could be something totally > random causing these issues. I'm open to any suggestions. I don't like the idea of running Windows without important updates (like the 1st one). Still, what I see is what I get: With those two updates uninstalled, WSJT-X operation returns to what was considered normal. I let the auto- update routine re-install both updates, and the errors and issues started right back up again. So, all I can do now it throw it out to the forum and see if any others have been through this and/or know what provides the relief sought. Cheers. > > Regards Richard m0clz Best 73, Paul DU2/WA8UGN > > -----Original Message----- > From: Paul DU2/WA8UGN > Sent: Tuesday, December 23, 2014 6:16 AM > To: wsjt-devel@... > Subject: [wsjt-devel] Possible Detection/Fix for KV Decoder Errors w/Windows > OS > > After extensive testing, and with the aid of Julian, VK4CMV, who confirmed > the existence of the exact same errors occurring with his WSJT-X > operations, I come to the conclusion that changes to Microsoft Windows via > periodic Windows updates, may be a major player in error activity. > > Testing was done on 3 different versions of WSJT-X (r3673, r4400, & r4633) > in total isolation from the world, save "on-air" signal input. Almost > every permutation of disabling software, option settings, etc. were > employed in a very large number of tests. Each test was performed after a > complete scrubbing of my laptop's hard drive, memory, and drivers. No > positive effects were observed during the tests. > > I finally uninstalled every Windows update placed into service in Dec 2014, > and re-tested. Results were most encouraging, with long runs of each > WSJT-X version before a hiccup. Hiccups were cured by restarting WSJT-X > (not the optimum resolution, but much better than others found to date). > > Final confirmation of WSJT-X - Windows interaction having some relationship > to the errors observed came when each Windows update was individually re- > installed. No change to the much improved operation of WSJT-X versions was > observed until two different updates were installed. Each caused a slow- > down of decoding, increased errors, and frequent Decode lock-ups. > > The "offending" Windows Updates are: > > KB3025390 - major "offender" > KB2952664 - minor "offender" > > With these two Windows updates uninstalled, and everything but the kitchen > sink attached to the laptop and every bit of software normally used in weak > signal operations here running, the results of testing were impressive. > Fast decoding (I use "Deepest" decoding), and a noteworthy improvement in > mean time between errors. Best, only one decoder lock-up over 6+ hours of > testing. If a KV error occurs, with or without the pop-up error window, > normal operation continues. The pop-up error window can be closed when it > appears - no observable deterioration in normal operations occur when that > pop-up appears, nor when it is manually closed. > > Any thoughts about this line of testing and its results? > > Best 73, > > Paul DU2/WA8UGN > > -------------------------------------------------------------------------- ---- > Dive into the World of Parallel Programming! The Go Parallel Website, > sponsored by Intel and developed in partnership with Slashdot Media, is your > hub for all things parallel software development, from weekly thought > leadership blogs to news, videos, case studies, tutorials and more. Take a > look and join the conversation now. http://goparallel.sourceforge.net > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@... > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2015.0.5577 / Virus Database: 4257/8788 - Release Date: 12/22/14 > > -------------------------------------------------------------------------- ---- > Dive into the World of Parallel Programming! The Go Parallel Website, > sponsored by Intel and developed in partnership with Slashdot Media, is your > hub for all things parallel software development, from weekly thought > leadership blogs to news, videos, case studies, tutorials and more. Take a > look and join the conversation now. http://goparallel.sourceforge.net > ------------------------------------------------------------------------------ Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
