On 11/07/2015 22:14, Michael Black wrote:
Hi Mike,
> Here's 5685 from the 53-second mark…there's a poll at that time which
> shouldn't hurt so I skipped that part
> The difference between these two runs is mainly at the Configuration.cpp:661
> point where 5685 has ptt=false and 5670 has ptt=true.
> And I think the difference is in this patch from 5690.
> @@ -1861,7 +1857,7 @@
> m_bTxTime=false; //Time to stop a WSPR
> transmission
> m_btxok=false;
> }
> - if(m_ntr==1) {
> + if(m_ntr) {
> WSPR_scheduling ();
> m_ntr=0; //This WSPR Rx sequence is
> complete
> }
>
>
> When m_ntr!=1 5685 does NOT call WSPR_scheduling which give ptt a chance to
> go false in StopTx2. In 5670 it does it when m_ntr==1 or m_ntr==-1 which is
> during any transition from Rx to Tx or back if I understand the logic
> correctly.
> Try changing it back to if(m_ntr==1) and see if that fixes the problem.
>
> All the log says on 5690 is this which doesn’t sound relevant to this patch.
> "Fix bug in JT4 decodes with MinW=G."
That change is my r5700 not r5670. You are right in the correct place
there. I am just trying to work though the behaviour right now to come
up with a correct fix.
>
> 73
> Mike W9MDB
73
Bill
G4WJS.
>
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/Configuration.cpp:661)Debug:
> Configuration::transceiver_frequency: 14095600
> Transceiver::TransceiverState(online: yes Frequency {10138700Hz, 0Hz} USB;
> SPLIT: off; PTT: off)
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:510)Debug: virtual void
> HamlibTransceiver::do_frequency(Transceiver::Frequency, Transceiver::MODE)
> 14095600 mode: USB reversed: false
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> kenwood_set_freq called
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> kenwood_transaction called
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> kenwood_transaction: cmdstr = FA00014095600
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> write_block(): TX 14 bytes
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib: 0000
> 46 41 30 30 30 31 34 30 39 35 36 30 30 3b FA00014095600;
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> write_block(): TX 3 bytes
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib: 0000
> 49 44 3b ID;
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> read_string(): RX 6 characters
> Sat Jul 11 20:19:54 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib: 0000
> 49 44 30 32 30 3b ID020;
>
> And here's 5700 from the 53-second mark
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/Configuration.cpp:661)Debug:
> Configuration::transceiver_frequency: 10138700
> Transceiver::TransceiverState(online: yes Frequency {21094600Hz, 0Hz} USB;
> SPLIT: off; PTT: on)
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:510)Debug: virtual void
> HamlibTransceiver::do_frequency(Transceiver::Frequency, Transceiver::MODE)
> 10138700 mode: USB reversed: false
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> kenwood_set_freq called
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> kenwood_transaction called
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> kenwood_transaction: cmdstr = FA00010138700
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> write_block(): TX 14 bytes
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib: 0000
> 46 41 30 30 30 31 30 31 33 38 37 30 30 3b FA00010138700;
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> write_block(): TX 3 bytes
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib: 0000
> 49 44 3b ID;
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib:
> read_string(): RX 2 characters
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:49)Debug: Hamlib: 0000
> 3f 3b ?;
> Thu Jul 9 18:47:53 2015
> GMT(/home/radio/Builds/wsjtx/HamlibTransceiver.cpp:41)Critical: Hamlib:
> kenwood_transaction: Unknown command or rig busy 'FA00010138700'
>
>
>
>
>
> ------------------------------------------------------------------------------
> Don't Limit Your Business. Reach for the Cloud.
> GigeNET's Cloud Solutions provide you with the tools and support that
> you need to offload your IT needs and focus on growing your business.
> Configured For All Businesses. Start Your Cloud Today.
> https://www.gigenetcloud.com/
> _______________________________________________
> wsjt-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
