On 09/09/2015 13:40, Joe Taylor wrote: > Hi Bill, Hi Joe, > > Thanks for doing the new DTR/RTS arrangement. I've just merged > revisions 5825, 5868, and 5869 from the main development branch into > wsjtx_exp. You might want to check that I did the right things with > Configuration.ui. All seems OK. > > -- Joe, K1JT 73 Bill G4WJS. > > On 9/9/2015 8:25 AM, Bill Somerville wrote: >> Hi All, >> >> I have just committed a change (r5869) to the main development branch that >> may >> require some of you to adjust the rig control settings. >> >> This change only effects those who use an interface powered from one of the >> serial port control lines (DTR or RTS), these type of interfaces are >> relatively >> rare. Until his change using a control line for power and the other control >> line >> for PTT has been an unsupported corner case. Due to a user needing this >> combination I have made the changes required to support this combination. >> >> The settings keys for forcing serial control lines have changed, so if you >> have >> such a requirement you will have to set up the forced control line again with >> this version. Below is a screen capture of an example configuration: >> >> >> >> 73 >> Bill >> G4WJS.
------------------------------------------------------------------------------ Monitor Your Dynamic Infrastructure at Any Scale With Datadog! Get real-time metrics from all of your servers, apps and tools in one place. SourceForge users - Click here to start your Free Trial of Datadog now! http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140 _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel