Hi Bill Thanks for this mod.
I have a need for this also, with a homebuilt CI/V interface that up to now has needed to run on external power. 73 Charlie > On 09/09/2015 13:40, Joe Taylor wrote: >> Hi Bill, > Hi Joe, >> >> Thanks for doing the new DTR/RTS arrangement. I've just merged >> revisions 5825, 5868, and 5869 from the main development branch into >> wsjtx_exp. You might want to check that I did the right things with >> Configuration.ui. > All seems OK. >> >> -- Joe, K1JT > 73 > Bill > G4WJS. >> >> On 9/9/2015 8:25 AM, Bill Somerville wrote: >>> Hi All, >>> >>> I have just committed a change (r5869) to the main development branch >>> that may >>> require some of you to adjust the rig control settings. >>> >>> This change only effects those who use an interface powered from one of >>> the >>> serial port control lines (DTR or RTS), these type of interfaces are >>> relatively >>> rare. Until his change using a control line for power and the other >>> control line >>> for PTT has been an unsupported corner case. Due to a user needing this >>> combination I have made the changes required to support this >>> combination. >>> >>> The settings keys for forcing serial control lines have changed, so if >>> you have >>> such a requirement you will have to set up the forced control line >>> again with >>> this version. Below is a screen capture of an example configuration: >>> >>> >>> >>> 73 >>> Bill >>> G4WJS. > > > ------------------------------------------------------------------------------ > Monitor Your Dynamic Infrastructure at Any Scale With Datadog! > Get real-time metrics from all of your servers, apps and tools > in one place. > SourceForge users - Click here to start your Free Trial of Datadog now! > http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140 > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ------------------------------------------------------------------------------ Monitor Your Dynamic Infrastructure at Any Scale With Datadog! Get real-time metrics from all of your servers, apps and tools in one place. SourceForge users - Click here to start your Free Trial of Datadog now! http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140 _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
