On 14/09/2015 14:07, Jay Hainline wrote: Hi Jay, > I build WSJTX 1.6.1 r5892 from sourceforge this morning. Using a Yaesu > FT-2000 and DXLabs Commander for CAT. I have 50.280 set in the Working > Frequencies list for JTMSK mode. When I put a checkmark in the box to > activiate the CQ RX 285, the radio goes to 50.285 as it should. But when I > Enable Tx to CQ, the radio stays on 50.285 instead of switching back to > 50.280 on transmit. It makes no difference if I have split operation set to > none or Rig in the settings and the Rx frequency offset with "CQ nnn..." is > check marked. Did Commander and your rig go into split mode?
As a sanity check can you try the same test with Commander not running and WSJT-X configured to talk directly to your rig please? > > 73 Jay > > Jay Hainline KA9CFD > Colchester, IL EN40om 73 Bill G4WJS. ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
