On 07/04/2016 14:06, George J Molnar wrote: > MLDX talks to the rig directly. In this case, using CAT over serial. It also > provides a UDP interface for other apps. FLDIGI, for example, interacts with > MLDX this way, so frequency display, etc., doesn't need a RigCAT or Hamlib > port configured. > > JT-Bridge picks up on that, serving as middleware talking to MLDX and > providing a DXLabs protocol connection for WSJTX through an IP:port > connection. > > Thus, only one app talks to the serial port directly. Hi George,
thanks for that. So you select "DX Labs Suite Commander" for the rig in WSJT-X "Settings->Radio"? I was not aware that other software emulated the the DX Lab Suite Commander rig control server. As an aside I can look at providing a MLDX rig control option in WSJT-X, I will have a look for the interface documentation. As for the immediate issue, here is an instrumented version of WSJT-X: https://dl.dropboxusercontent.com/u/4192709/wsjtx-1.7.0-devel-Darwin-r6596-CAT-trace.dmg you can run it directly from the DMG without installing. Run a minimal session that demonstrates the issue and then quit WSJT-X. It will have created a trace log file: $TMPDIR/WSJT-X_trace.log send me that, off list, for analysis please? 73 Bill G4WJS. ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
