Bill,
I have been testing WSJT-X v 1.7.0 r6541 for several weeks now with generally
satisfactory results. I have been operating with either a Flex 6700 or a Flex
5000. I set WSJT-X to TS-2000 as the Flex rigs understand those Kenwood CAT
commands and I understand that the Flex 6xxx commands are not implemented into
WSJT-X at this point in time. I also normally operate with "Fake It", but "Rig"
and "None" seem to work fine as well (assuming that I expand the transmit and
receive bandwidths when using None).
Today I built Hamlib3 and WSJT-X 1.7.0 r6626 as a package and installed it on a
computer that I have dedicated to ham radio. Upon trying to run it with my Flex
6700, I immediately encountered rig control errors as the following screen
capture illustrates:
After some experimentation, I found that if I selected USB in WSJT-X (rather
than Data/Pkt) and placed the Flex in USB mode rather than the usual DIGU
(digital upper sideband) I could clear the error message and use WSJT-X
normally.
DIGU mode bypasses audio processing such as equalization, so it should be used
with WSJT-X.
I assume that this is a Hamlib3 bug and hopefully one that can be easily
squashed.
Thanks for your fine work on this software.
Ed, K0KC
k0kc@arrl.nethttp://k0kc.us/
------------------------------------------------------------------------------
Find and fix application performance issues faster with Applications Manager
Applications Manager provides deep performance insights into multiple tiers of
your business applications. It resolves application problems quickly and
reduces your MTTR. Get your free trial!
https://ad.doubleclick.net/ddm/clk/302982198;130105516;z
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
