On 19/06/2016 04:23, Steven Franke wrote: > I was just playing around with WSPR-2 mode while becoming familiar with a new > radio. The radio isn’t yet connected to an external reference, so I decided > to use WSJT-X’s frequency-offset correction capability to correct a 4 Hz > offset on 30m WSPR-2. In the Frequencies tab of the preferences, I entered > the 0.4ppm slope into the B box, leaving A=0. This didn’t make any difference > in the waterfall display, nor did it change the reported frequencies in the > printed decodes. The frequency correction was applied only after I activated > the Tune button, at which time it looks like it sent an offset frequency to > the radio. When I disabled Tune, I could see the jump in the waterfall > indicating that the frequency correction was being applied to the displayed > signals. Is it supposed to be necessary to transmit in order to get the > frequency correction to “take"?
Hi Steve, I have recently optimized the rig control a fair bit and it would need a rig control command to be sent before any change in calibration were acted upon. The best option is probably to treat the calibration parameters as critical rig control parameters, there is already a mechanism to "restart" the current rig control link for other key parameters so it will be easy to add calibration to that trigger. In r6782 I have done that, it may not do quite what you are expecting but at least the WSJT-X frequency display will be consistent with the rig frequency display and the settings after you click "Ok" to commit the settings changes. 73 Bill G4WJS. ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohomanageengine _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
