Hi Jay, Steve, K5DOG and Randy, WB8ART have reported this behavior too. The entire spectrum is shifted up by 500 Hz when this happens. I have seen it happen on Steve’s signal, and I have a wav file that illustrates the behavior.
The answers to the following questions will help us figure out what’s going on: Are you using Joe’s “official” alpha release of WSJT-X 1.7? I think that both Steve and Randy were running Windows XP when they experienced this problem. What OS are you using? Does the freq shift only happen when you use autosequence? Does it happen if you use click-to-decode to advance the sequencer before the end of the cycle? Any other details, or, ideally, a prescription for reproducing the behavior reliably, would be helpful. Thanks for the report! Steve k9an > > On Aug 13, 2016, at 7:50 AM, Jay Hainline <[email protected]> wrote: > > I have been working a few people using MSK144 mode. We have noticed there is > a slight upward change in the audio frequency that is transmitted when the > next transmit sequence is automatically selected using Auto sequencing. Then > the next time it transmits, the transmit audio is back to normal. Has anyone > else noticed this and is this normal behavior? > > Jay Hainline KA9CFD > Colchester, IL EN40om > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity > planning reports. > http://sdm.link/zohodev2dev_______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
