I am not running split. Split operation is set to None. I am set up using DX Lab Commander for radio control and PTT. Radios is a Flex 6500 for 6 meters and a Yaesu FT-991 for 2 meters. I have noticed this audio shift in both radios.
73 Jay KA9CFD -----Original Message----- From: Bill Somerville [mailto:[email protected]] Sent: August 13, 2016 13:36 To: [email protected] Subject: Re: [wsjt-devel] MSK144 transmit audio On 13/08/2016 14:30, Steven Franke wrote: > Any other details, or, ideally, a prescription for reproducing the behavior reliably, would be helpful. Hi Jay, Steve & all, Do you have "Settings->Radio->Split Operating" set to something other than "None"? It is possible that the logic to keep HF Tx signals centred on the rigs Tx SSB passband is kicking in when it should not. Setting "Split Operating" to "None" should stop that happening. 73 Bill G4WJS. ---------------------------------------------------------------------------- -- What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://sdm.link/zohodev2dev _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
