On 16/12/2016 10:01, Дмитрий Гончар wrote: > The program works, but the figures which are responsible for audio in > the lower left corner of a main window are very not stable. How to > correct it?
Hi Dmitry, I assume you are referring to the percentage shown in the left hand Rx status bar indicator while using MSK144 mode. This is an estimation of CPU utilization so you can tune your receive parameters so as not to overload the CPU. The "Menu->Decode->Fast/Normal/Deep" settings and the FTol settings will impact CPU load and the intention is that you choose settings that keep the figure less than 90%. When the utilization is estimated as higher than 90% the background turns red, this is an indication that too much work is being attempted and the decoder is not keeping up with incoming audio. When this happens you should either reduce the FTol value or switch to "Normal" or "Fast" in the "Menu->Decode" pop up menu. 73 Bill G4WJS. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
