I'll take a look at #2 with the callsign....
de Mike W9MDB
From: Bill Somerville <[email protected]>
To: [email protected]
Sent: Monday, July 10, 2017 2:41 PM
Subject: Re: [wsjt-devel] FT8 + Autoseq + Free Text TX5
On 10/07/2017 20:35, Black Michael via wsjt-devel wrote:
#1 Disable the genStdMsgs logic after an alternate Tx 5 is selected. #2 Break
out of genStdMsgs early based on the message being transmitted. #3 Don't call
genStdMsgs based on m_ntx
Hi Mike, a better solution might be to not generate Tx5 if the QSO partner
base call has not changed since the last generation. #1 make is impossible to
ever go back to generated Tx 5 (F4 or auto clear aside). #2 is basically my
solution above except base on QSO partner callsign. #3 sounds like a lot of
work and potential for defects. 73
Bill
G4WJS.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
