Same thing has happened here numerous times over numerous versions. I found by shutting off the Automatic system I'm able to from a macro insert a 73 message. Of course, all this takes time, after the other station has sent RRR - pia at any rate.

73 Dwight NS9I


On 7/24/2017 9:54 AM, Ed Wilson via wsjt-devel wrote:
I have been testing WSJT-X rc2 on FT8 over the past few days and noted that it has the same defect that I reported earlier of the Tx5 line in the Standard Messages seemingly randomly showing-up and transmitting blank. I built r7935 yesterday and noted today that the same issue continues to exist. I believe that I have found a condition (not necessarily the only one) that results in a blank line as follows:

I was working a weak station with Auto Sequence and Call 1st enabled. I sent him his report several times but received no decoded response. I then gave up, hit Halt Tx, and pressed F4 to clear the messages. I monitored for several 15 second periods and then suddenly copied a decode from this station of RRR. To respond to him, I double-clicked the RRR line which populated the Standard Messages with his call but left Tx5 (73) blank. I did not notice this at first and transmitted a blank line instead of a 73. When I did notice, I sent a macro of RRR TU 73 and he replied with the standard 73 line.

I trust that I have provided sufficient information to troubleshoot this issue.
Ed, K0KC

k...@arrl.net
http://k0kc.us/


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot


_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to