I have been testing WSJT-X rc2 on FT8 over the past few days and noted that it
has the same defect that I reported earlier of the Tx5 line in the Standard
Messages seemingly randomly showing-up and transmitting blank. I built r7935
yesterday and noted today that the same issue continues to exist. I believe
that I have found a condition (not necessarily the only one) that results in a
blank line as follows:
I was working a weak station with Auto Sequence and Call 1st enabled. I sent
him his report several times but received no decoded response. I then gave up,
hit Halt Tx, and pressed F4 to clear the messages. I monitored for several 15
second periods and then suddenly copied a decode from this station of RRR. To
respond to him, I double-clicked the RRR line which populated the Standard
Messages with his call but left Tx5 (73) blank. I did not notice this at first
and transmitted a blank line instead of a 73. When I did notice, I sent a macro
of RRR TU 73 and he replied with the standard 73 line.
I trust that I have provided sufficient information to troubleshoot this issue.
Ed, K0KC
[email protected]http://k0kc.us/
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
