Did you reset the Frequency List as recommended in the README ???
The frequency display RED is often a symptom of an empty frequency list,
as discussed in the README.
Neil, KN3ILZ
On 10/22/2017 4:44 PM, Philippe CHARDON (LaPoste) wrote:
Hi Mike,
I started hamlib in full verbose mode. I reinstalled rc3. Same issue, frequency
display red + no control of band or mode. Afterwards I reinstalled rc1. It
works like a charm.
Please find the hamlib log attached. It records only the last exchanges before
I made my stuck wsjt-x rc3 exit. I went through the log quickly and could not
find any error.
Maybe some trials I made after the previous installation of rc3 in order to
make it work disturbed hamlib. This time I just started wsjt-x rc3 and quit
after a few seconds.
Thanks
73 Phil
F5FDV
Le 22 oct. 2017 à 06:30, Black Michael via wsjt-devel
<[email protected]> a écrit :
The error isn't showing up in your txt file.
Can you re-run rigctld with -vvvvv and send just the last part that shows the
get_vfo call and error?
de Mike W9MDB
On Saturday, October 21, 2017, 4:28:11 PM CDT, Philippe CHARDON (LaPoste) via
wsjt-devel <[email protected]> wrote:
Hello everyone,
You will find the description of the issue that I faced while trying to use the
last 2 releases of WSJT-X. Going back to Rev 1.8 rc1 solves the problem.
- Program version: 1.8.0-rc2 & rc3, hamlib-w64-3.1
- Operating system: Windows 8 64
- Concise description of the problem:
The frequency display background is red,
It is impossible to change the mode,
The selection of the band (rolling list) is not operational,
Opening the preference panel provides no way to solve the issue.
- Exact sequence of steps required to reproduce the problem: It happens as soon as
WSJT-X rc2 & 3 have been started up.
- Rig Information: FTDX1200 & SCU 17
I use the most recent version of Hamlib as a standalone program. WSJT-X
connects to the Hamlib software via the Hamilb NET rigctl selected in the
preference menu.
I could get access to the messages reported by Hamlib during the issue. You
will find a copy attached as well as some pictures of my PC screen.
According to my understanding, rc2 & 3 may send invalid commands to Hamlib.
73 Philippe
F5FDV
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
