I am using 1.9-RC2. What I am trying to do is run N1MM+ and WSJT-X
simultaneously to control the radio without having to reconfigure one or the
other program to avoid CAT port conflicts. It gets to be pretty clumsy to
switch programs, or have N1MM+ open to get UDP broadcasts.
I see from some internet sleuthing that HamLib wants to have exclusive control
of the radio, as it does not poll the radio to see if anything on the radio
that the other program has changed has modified WSJT-X settings like mode or
frequency.
So, it appears that it won’t work unless some sort of context-switching layer
is coded. It seems plausible to do this, but I don’t find it done anywhere and
it would be a gnarly software project to write it. Covering all the possible
interactions between all programs is a daunting project.
Sigh…..
From: Neil Zampella [mailto:ne...@techie.com]
Sent: Thursday, March 08, 2018 2:18 PM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] VSPE issue
Are you using version 1.9.0-RC2, as it interfaces directly with N1MM.
On 3/8/2018 10:56 AM, Ted Gisske wrote:
Has anyone had success using a VSPE splitter to direct both N1MM+ and WSJT-X to
the same rig-control port (in my case a TS-990 on COM4). If so, I’d appreciate
knowing how you got it done. The splitter seems to work OK with N1MM, but
WSJT-X refuses to connect.
Thanks!
Ted
K9IMM
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
