Aah. Ok. One day ill get to EME.
Thanks and Regards
John Ward
73 de John
ZS1EQ
On 16 Mar 2018 08:42, <[email protected]> wrote:
> Hi John
>
> The problem OZ1LPR ran into was during some EME tests of the new Doppler
> modes in 1.9.0. He was attempting to operate manual split with Doppler
> tracking set to off, in an attempt to disable CAT frequency commands to
> his radio completely. He found that having set up his VFO A and VFO B to
> different frequencies (so as to be able to simulate a non CAT station, eg
> someone using WSJT10) one of the VFOs would still get reset by the
> program unexpectedly. This behaviour prevented us from carrying out the
> test.
>
> He also could not use the Rig at None, as he used PTT via CAT.
>
> 73
>
> Charlie
>
>
>
>
> > Morning. Cant you simply avoid the birdie by adjusting the tx/rx
> frequency
> > settings with the mouse on the waterfall display and then use the "fake"
> > options in the settings?
> >
> > Thanks and Regards
> > John Ward
> >
> > 73 de John
> > ZS1EQ
> >
> > On 16 Mar 2018 8:17 AM, <[email protected]>
> wrote:
> >
> >> Hi Peter
> >>
> >> One option might be to arrange PTT via a serial port to the mic PTT line
> >> and not have to use CAT, in which case the Rig to 'None' would work.
> >>
> >> I have heard of one other request for what you are asking, from OZ1LPR,
> >> for much the same reasons.
> >>
> >> 73
> >>
> >> Charlie G3WDG
> >>
> >> >>
> >> >> Hello,
> >> >>
> >> >
> >> > firstly my thanks to those who are at the coal face developing WSJT
> >> and
> >> > its
> >> > brothers.
> >> >
> >> > I would like to see if it would be possible to include a toggle on the
> >> > main
> >> > GUI that stops WSJT-X sending frequency set commands to the
> >> transceiver.
> >> > When I control my IC-7600 and my IC-910 with WSJT-X it does a great
> >> job
> >> of
> >> > setting the rig to the right frequency for the mode but some times
> >> there
> >> > is
> >> > a need to be on a non standard frequency if some one has a birdie or
> >> > chasing EME. I find if I go into the settings menu and then come out,
> >> (to
> >> > check a setting which we all do some times) the software does a
> >> frequency
> >> > set to the rig and I end up back on a standard frequency for that
> >> mode,
> >> > which is for those times very un helpful especially when chasing EME
> >> on
> >> 50
> >> > MHz
> >> >
> >> > I had in the past set WSJT-X to be "no rig" to stop this but now I
> >> need
> >> to
> >> > send PTT via CAT to the IC7600 so cannot use that strategy now.
> >> >
> >> > Could the big Green / Red indicator next to the frequency readout be
> >> made
> >> > into a toggle ? then a mouse click could change the rig mode, add the
> >> > colour BLUE (first colour that jumped into my head) to represent the
> >> rig
> >> > frequency will not be set by the software? (does not require any new
> >> GUI
> >> > real estate to add the feature). Then a simple mouse click on the
> >> > tri-coloured dot can put it back to GREEN for automated setting of the
> >> > rig.
> >> >
> >> > Unsure if it is only me that experiences this in day to day operating,
> >> if
> >> > no others support it, then I expect this will not make it through.
> >> >
> >> > Regards,
> >> > Peter, VK5PJ
> >> > ------------------------------------------------------------
> >> ------------------
> >> > Check out the vibrant tech community on one of the world's most
> >> > engaging tech sites, Slashdot.org!
> >> > http://sdm.link/slashdot____________________________________
> ___________
> >> > wsjt-devel mailing list
> >> > [email protected]
> >> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> >> >
> >>
> >>
> >>
> >> ------------------------------------------------------------
> >> ------------------
> >> Check out the vibrant tech community on one of the world's most
> >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >> _______________________________________________
> >> wsjt-devel mailing list
> >> [email protected]
> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> >>
> > ------------------------------------------------------------
> ------------------
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org!
> > http://sdm.link/slashdot_______________________________________________
> > wsjt-devel mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> >
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
