For what it is worth, I am seeing the same issue on two different
Windows 7 64-bit computers running the new 1.9 rc3. Never saw this on
prior versions of any WSJT since inception.
I tried to connect CAT directly through the WSJT program and also
through HRD program and had same results. Also had same results with and
without JTAlert running.
I also had same results with one computer connected to KX3 and the other
connected to ICOM IC746Pro. A friend of mine also reported the issue to
me this morning.
I will do more testing and reading. I will revert back to 1.9 rc2 to see
what is shows but never had issue before since it came out. BTW, the
Icom 746Pro was connected to dummy load to dismiss RFI in the shack
comments back ;)
73 Gene K5PA
On 3/20/2018 12:31 PM, Jason Smith Q-Sky wrote:
Thanks, kinda glad it’s not just me. In my case I’m controlling an
Icom IC-718 via HRD. Never seen this before till RC3, RC2 was fine.
Can’t say for certain but it seems to do this more when idle. i.e.
receiving in the background but no active hands on transmitting, a
little bit like a ‘sleep’ mode or timeout..
I’ve not seen it for a little while, I was on 17m earlier in the day
now on 20m so perhaps band related (as mad as that might sound!).
Jason.
*From:*Black Michael via wsjt-devel <[email protected]>
*Sent:* 20 March 2018 17:23
*To:* '[email protected]'
<[email protected]>
*Cc:* Black Michael <[email protected]>
*Subject:* Re: [wsjt-devel] Possible issue with RC3
Were you running RC2 OK?
Yours would be the 2nd report we have of this.
Other guy is an IC-7300 with direct control of it via hamlib.
I'm working with him now to try and isolate the problem.
de Mike W9MDB
On Tuesday, March 20, 2018, 12:06:15 PM CDT, Jason Smith Q-Sky
<[email protected] <mailto:[email protected]>> wrote:
An observation since upgrading to RC3:-
On Windows 10 64bit o/s
I use WSJT-X with Signalink Interface and Cat control via Ham Radio
Deluxe on the same PC.
I upgraded to RC3 last night.
Almost immediately I’ve begun noticing that WSKT-x occasionally loses
rig control, the usual green dot tends to go orange and eventually red
with a pop up error. I then have to click ‘retry’ and it seems to sort
itself for a bit. I’ve never had this before. I’ve restarted all HRD
windows and they all appear to be working just fine.
Not sure if some sort of lag in connection may have crept it?
Jason.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
<http://sdm.link/slashdot>_______________________________________________
wsjt-devel mailing list
[email protected] <mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
This body part will be downloaded on demand.
This body part will be downloaded on demand.
--
Gene & Carolyn Hinkle
2026 Spyglass Hill, Leander, TX 78641
e-mail to Gene: [email protected]
cell phone or text messaging: (512) 413-9251
e-mail to Carolyn: [email protected]
cell phone or text messaging: (512) 633-4943
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
