New theory on this one, I think it may be occurring more (if not exclusively)
when I am operating remotely using TeamViewer, something I’ve done without
incident through several versions… Not sure if this bears any resemblance to
your scenario?
Jason.
From: Gene H <[email protected]>
Sent: 21 March 2018 14:06
To: [email protected]
Subject: Re: [wsjt-devel] Possible issue with RC3
For what it is worth, I am seeing the same issue on two different Windows 7
64-bit computers running the new 1.9 rc3. Never saw this on prior versions of
any WSJT since inception.
I tried to connect CAT directly through the WSJT program and also through HRD
program and had same results. Also had same results with and without JTAlert
running.
I also had same results with one computer connected to KX3 and the other
connected to ICOM IC746Pro. A friend of mine also reported the issue to me this
morning.
I will do more testing and reading. I will revert back to 1.9 rc2 to see what
is shows but never had issue before since it came out. BTW, the Icom 746Pro was
connected to dummy load to dismiss RFI in the shack comments back ;)
73 Gene K5PA
On 3/20/2018 12:31 PM, Jason Smith Q-Sky wrote:
Thanks, kinda glad it’s not just me. In my case I’m controlling an Icom IC-718
via HRD. Never seen this before till RC3, RC2 was fine.
Can’t say for certain but it seems to do this more when idle. i.e. receiving in
the background but no active hands on transmitting, a little bit like a ‘sleep’
mode or timeout..
I’ve not seen it for a little while, I was on 17m earlier in the day now on 20m
so perhaps band related (as mad as that might sound!).
Jason.
From: Black Michael via wsjt-devel
<[email protected]><mailto:[email protected]>
Sent: 20 March 2018 17:23
To: '[email protected]<mailto:[email protected]>'
<[email protected]><mailto:[email protected]>
Cc: Black Michael <[email protected]><mailto:[email protected]>
Subject: Re: [wsjt-devel] Possible issue with RC3
Were you running RC2 OK?
Yours would be the 2nd report we have of this.
Other guy is an IC-7300 with direct control of it via hamlib.
I'm working with him now to try and isolate the problem.
de Mike W9MDB
On Tuesday, March 20, 2018, 12:06:15 PM CDT, Jason Smith Q-Sky
<[email protected]<mailto:[email protected]>> wrote:
An observation since upgrading to RC3:-
On Windows 10 64bit o/s
I use WSJT-X with Signalink Interface and Cat control via Ham Radio Deluxe on
the same PC.
I upgraded to RC3 last night.
Almost immediately I’ve begun noticing that WSKT-x occasionally loses rig
control, the usual green dot tends to go orange and eventually red with a pop
up error. I then have to click ‘retry’ and it seems to sort itself for a bit.
I’ve never had this before. I’ve restarted all HRD windows and they all appear
to be working just fine.
Not sure if some sort of lag in connection may have crept it?
Jason.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
wsjt-devel mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
This body part will be downloaded on demand.
This body part will be downloaded on demand.
--
Gene & Carolyn Hinkle
2026 Spyglass Hill, Leander, TX 78641
e-mail to Gene: [email protected]<mailto:[email protected]>
cell phone or text messaging: (512) 413-9251
e-mail to Carolyn: [email protected]<mailto:[email protected]>
cell phone or text messaging: (512) 633-4943
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
