Dear All,... thanks for organizing this interesting test which I successfully attended. Here are my results:
1. Bug or Nuisance(?): While operating as a Hound there are no UPD messages of decoded signals provided. This strongly hampers customized post processing such as Highlighting of wanted Calls, access to QRZ.COM and other DXCC related databases. Thus, enabling UDP broadcast is highly appreciated. 2. I flawlessly worked W1/KH7Z after about 10 minutes calling. I could hear him all the time (TS-990 + 3El @ 22m ) , even when he used 5 carriers. However, I was quite surprised to receive -23dB while he was at +11dB on my side...? 3. When Joe/K1JT took over he came back to me at 144730 sending my report. My WSJT-X responded by R-19. However, I did not receive Joe's RR73. Thus, my message was repeted several times ... to no avail. I finally decided to start a completely new calling sequence. Luckily, we worked without any problems about 10 mins later. 4. W7/KH7Z was -10 to -16dB in QSB most of the time. However, it was virtually impossible to break the US-wall. Finally, after about 50 mins calling he came back to me. We flawlessly exchanged reports and completed the contact. He suddenly was -01dB at my side and gave me -04dB. Was it QSB or did he turn his antenna? Looking forward to the final release. Thanks for the good work, Joe and the devel team! Vy73: Alwin/DJ9KG __________________________________________________________________________
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel