I let it run six attempts then I stop it. Since the RR73 is incoming from
the Fox and I have all the details I need for entry into my log, I log it,
then wait for the Club Log verification. If I am in the fox log on the
that band I will upload my log.
On Mon, Jul 2, 2018 at 3:07 AM, Charles Suckling <
char...@sucklingfamily.free-online.co.uk> wrote:
> Hi All
>
>
>
> 20m conditions were a bit better today and I finally managed to work Baker
> with 100W, lots of feeder loss and a sloping dipole.
>
>
>
> The problem I had was, after receiving my report from KH7Z, I failed to
> receive RR73. Thanks to Bill’s advice to start over again (TX1 message),
> on the 4th QSO attempt (this time with G4KGC in the shack) I finally got
> my RR73. Within about 5 sequences they came back again with a report
> again, and QSO attempts proceeded normally.
>
>
>
> Decoding was reasonably reliable at the time. It seems they did not
> receive my TX3 message, hence did not send RR73, rather than me not
> decoding the RR73.
>
>
>
> What became apparent was that under these circumstances my TX freq was
> shifted three times, then stuck on the final frequency and transmissions
> would have continued at infinitum:
>
>
>
> I guess this is what is expected as the User guide para 14 says:
>
>
>
>
>
> Here is an example of one of the failed attempts:
>
>
>
> 083545 Tx 3056 ~ KH7Z G3WDG IO92
>
> 083630 -13 -0.5 390 ~ G3WDG KH7Z -15
>
> 083645 Tx 390 ~ KH7Z G3WDG R-13
>
> 083700 -16 -0.6 389 ~ G3WDG KH7Z -15
>
> 083715 Tx 389 ~ KH7Z G3WDG R-16
>
> 083730 -14 -0.6 330 ~ G3WDG KH7Z -15
>
> 083745 Tx 330 ~ KH7Z G3WDG R-14
>
> 083815 Tx 630 ~ KH7Z G3WDG R-14
>
> 083845 Tx 630 ~ KH7Z G3WDG R-14
>
> 083915 Tx 630 ~ KH7Z G3WDG R-14
>
> 083945 Tx 630 ~ KH7Z G3WDG R-14
>
> 084015 Tx 630 ~ KH7Z G3WDG R-14
>
> 084045 Tx 630 ~ KH7Z G3WDG R-14
>
>
>
> After moving to 630 it stayed there and continued transmitting until I
> intervened, thinking that the QSO had failed and I was unnecessarily
> causing QRM.
>
>
>
> Should I have waited longer for Fox to respond?
>
>
>
> In the situation where hounds to not receive their RR73, presumably a
> wall of QRM below 1000 develops for Fox making it more difficult for QSOs
> to complete? I saw other stations in the same fix as I was, repeating
> their TX3 messages for many periods.
>
>
>
> 73
>
>
>
> Charlie
>
>
>
>
>
>
>
>
> ------------------------------
> [image: Avast logo]
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>
> <#m_1036359674452807471_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
