In hound mode, would it be a good idea to use another watchdog timer to
trigger on received messages from the DX call, perhaps started with a 5 min
period (after first call) and reset to a longer timeout (15min?) on decoded
messages from the DX ? Additional reset by a longer idle period (say
30-60min ?). Of course on receiving a reply to your call you'll be able to
respond, so this should not mess too much with the usual weak signal way of
communication.
This way, you would be able to call initially but further calling needs
decoded messages. Sure it would be reset by a program restart, but perhaps
deter the casual blind caller.
These special functions would be specific to hound mode, also perhaps not
used on VHF and up, if fox/hound ever get popular there.
In fox mode, I can see that blocking seemingly non responding calls can
catch a bunch of serious operators if a QRM station decides to send on top
of the DX and mess with the pileup. Something like this likely needs some
selectable timeout.
Very nice to see this mode activated with dedicated stations on
expeditions, it clearly demonstrates the big potential of this great mode.
73's and happy DX'ing
Daniel SA2KNG
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel