On 08/07/2018 20:30, Fred Carvalho wrote:
Entering in SETTING then RADIO folder, one can enter a COM port for
CAT and a different COM port for PTT, using DTR or RTS signals. IF CAT
is configured and a given COM port associated to it, when assigning
another COM port for PTT either with RTS or DTR marked, the “TEST PTT
“ function does not work. However after entering OK, I observed that
the PTT via RTS/DTR works normally. So the only problem is that the
TEST PTT function is not performed under the above conditions.
Hi Fred,
if CAT is enabled then you must try "Test CAT" and get a ACK response
(green button) before "Test PTT" is enabled.
73
Bill
G4WJS.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
