Hi Bill, it worked, thanks. I have tried both but not in this sequence. But
why that ? One thing has not to do with the other..
Thanks for your input. So we have NO glitch. Regards Fred
2018-07-08 16:54 GMT-03:00 Bill Somerville <[email protected]>:
> On 08/07/2018 20:30, Fred Carvalho wrote:
>
>> Entering in SETTING then RADIO folder, one can enter a COM port for CAT
>> and a different COM port for PTT, using DTR or RTS signals. IF CAT is
>> configured and a given COM port associated to it, when assigning another
>> COM port for PTT either with RTS or DTR marked, the “TEST PTT “ function
>> does not work. However after entering OK, I observed that the PTT via
>> RTS/DTR works normally. So the only problem is that the TEST PTT function
>> is not performed under the above conditions.
>>
>
> Hi Fred,
>
> if CAT is enabled then you must try "Test CAT" and get a ACK response
> (green button) before "Test PTT" is enabled.
>
> 73
> Bill
> G4WJS.
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
--
Fred - PY2XB
Other calls: PY2FXH, PY2FXH/W2, PY2XB/0, F/PY2XB, ZX2XB, PT7BXB,
PY2XB/PY0F, PQ0F, VP5/PY2XB, PW2IO (SA-071), ZX8W (SA-060), PY2XB/1
(SA-029), 8P9XB, PQ8XB (SA-045), ZX2S (SA-28), W4/PY2XB, 3D2XB, PY22XB,
PY0FX, W2/PY2XB, W9/PY2XB, VE3/PY2XB. Team member: PW2M (SA-071), PX8J
(SA-041), T30PY - T30SIX, PT0S, 9M0W
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
